Profitec DRIVE Bedienungsanleitung Seite 168

15 Shutdown, dismantling, and storage
15.1 Shutting down the machine
1. Switch off the machine using the on/off button.
The LED ring goes out.
¾
2. Disconnect the mains plug from the mains.
15.2 Dismantling the machine with a mains water
connection
1. Empty the machine (see Chapter 11.6, „Emptying the boiler").
2. Shut down the machine.
3. Close the mains water shut-off valve.
4. Allow the machine to cool down completely.
5. Disconnect the water connection hose from the water supply and from
the water connection nozzle on the device.
6. Remove the cup raiser and grid from the drip tray.
7. Pull the drip tray out of the device.
8. Remove the blind filter from the drip tray holder.
9. Disconnect the drain pan from the wastewater connection and device.
10. Remove the water filter from the water tank.
15.3 Dismantling the machine in tank mode
1. Empty the machine (see Chapter 11.6, „Emptying the boiler").
2. Shut down the machine.
3. Allow the machine to cool down completely.
4. Remove the cup raiser and grid from the drip tray.
5. Pull the drip tray out of the device.
6. Remove the blind filter from the drip tray holder.
7. Drain water from the water tank.
DRIVE_BA_V3.0 EN - 167