Profitec DRIVE Bedienungsanleitung Seite 113

The machine is packaged with a protective cover and is protected by foam
padding. All accessories come in a separate box and are protected by foam.
Both the transport box and the accessories box have handles for easier
handling. Always handle boxes using these handles. Due to the weight of the
machine, it is recommended that two people carry the box.
1. Make sure that the transport box is upright (see Chapter 6.1, „Markings
on the packaging").
2. Carefully open the transport box with a cutter knife.
3. Take accessories out with both hands and place them on a flat surface.
4. Open the box and take all accessories out of the cut-outs in the foam
insert.
5. Lift the machine out of the transport packaging with both hands and
place it on a flat, sufficiently load-bearing surface.
6. Remove the foam padding and protective cover.
7. Store the original packaging in a dry location.
6.4 Checking the scope of delivery
When you get your machine, make sure you check the following:
• that all parts are there as per the scope of delivery (see Chapter 6.2,
„Scope of delivery")
• that the individual components and their packaging are undamaged
If the machine or packaging is damaged or components are missing, contact
the manufacturer or dealer immediately and do not use the machine.
6.5 Transportation
NOTICE
Damage due to improper transportation
The machine may become damaged if not transported properly.
• Only use the original packaging for transportation.
• Make sure that the machine is upright, if possible on a pallet, during
transportation.
• Do not place any other heavy objects on the packaging.
• Stack a maximum of 3 packages on top of one another.
• Protect the machine from the elements (e.g. snow, rain, frost, direct
sunlight).
EN - 112 DRIVE_BA_V3.0