Profitec DRIVE Bedienungsanleitung Seite 163

EN - 162
5. Insert a new shower screen into a new
gasket. When doing so, orient the gasket
so that the Profitec logo is pointing up.
6. Insert the shower screen with gasket into
the brew group using your hand and press
it in.
7. Place a portafilter without a filter against
the shower screen and lever it in in one
movement to tighten the shower screen.
With the other hand, apply counter-
pressure to the brew group from above.
8. Remove the portafilter from the brew
group.
9. Insert the blind filter in the portafilter.
10. Insert the portafilter with blind filter in the
filter group and tighten the shower screen
in one movement.
The brew group is ready to use again.
9
DRIVE_BA_V3.0