Profitec DRIVE Bedienungsanleitung Seite 125

9 Operation
9.1 Operating modes
9.1.1 Operational readiness
The machine starts to heat up after being switched on. The respectively
reached brew temperature and, if activated, the steam temperature are
shown on the display. As soon as the set temperature values are shown on
the display, the machine is ready to use.
9.1.2 Continuous operation
The machine operates continuously after being switched on. Continuous
operation can be ended as follows:
• Set ECO mode via the menu or activate it via the shortcut function (see
Chapter 9.1.4, „ECO mode");
• Switch off the machine (see Chapter 9.2.1, „Switching the machine on
and off").
9.1.3 Standby mode of the display
When the machine has been switched on but has not performed a function
for several minutes, the display goes into standby mode. A running text
that alternately displays the brew temperature and, if activated, the steam
temperature is shown in the standby mode of the display.
9.1.4 ECO mode
ECO mode makes it possible to program the machine so that the heating
function is deactivated and the display is switched off after a certain period
of time has elapsed. The machine remains switched on (the LED ring of the
on/off button lights up). The countdown of the set time starts after the last
brewing process is complete or after the last button press.
ECO mode can also be activated directly via the shortcut function (see
Chapter 9.4, „Shortcut functions"). To activate ECO mode automatically, the
function must be activated and the countdown set via the menu (see Chapter
10.3.5, „Eco Mode").
EN - 124
Sleep icon
Shortly before the machine activates ECO mode,
the sleep icon appears on the display and indicates
that the machine is going into ECO mode.
DRIVE_BA_V3.0