TABLE OF CONTENTS
located at the end of the arm is below the spoiler.
Brake the sensor again.
The central key of the sensor keypad displayed on the screen will start to flash, indicating that it needs to be pressed for the sensor
in question to be able to continue.
Sensor keypad
Flashing central key
Direction in
which the sensor
must be tilted
At this point, unlock the front right sensor, lower it until the level indicator perfectly matches the arrival point and lock the sensor
again.
The screen that appears is the following:
The screen that appears when the key is tapped is the following:
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
Direction in
which the sensor
must be tilted
Sensor level
indicator
Level indicator
arrival point
It is possible to Zoom
in close to the arrival
point by performing
"pitch to zoom"
2015-M366-00
EN-123