Saving The Tests With Teq-Link; Teq-Link Function Configuration - Dover Vsg Rav.td2Wf Übersetzung Der Originalanleitung

TABLE OF CONTENTS

7.18 SAVING THE TESTS WITH TEQ-LINK

At the end of the test, it is possible to save the report with the results and all the vehicle data using the "TEq-Link" function.
It is necessary to install the "TEq-Link Web Manager" software in a Personal Computer connected to the workshop's computer
network and the Tablet must be connected to the same data structure, e.g. by connecting the Access Point to a network socket shared
with the PC where the "TEq-Link Web Manager" SW is installed (Para. 3.7; see also references in the quick start guide, code M0335).
NOTE: It is necessary to ask the Manufacturer in advance to enable the feature, by communicating the serial number of the device
(see information in the quick start guide, code M0335) and configure the APP with the references of the PC where the "TEq-Link Web
Manager" SW is installed.
After the test, when entering the customer data (Para. 7.16), it is possible to save the test results using the "Blue" key (Para. 7.18).
When the tests carried out are stored, their results are immediately accessible from any PC or mobile device in the network shared
with the Tablet.
7.18.1

TEq-Link function configuration

Before saving the test with the TEq-Link functionality, it is necessary to insert the references of the PC where the "TEq-Link Web
Manager" software is installed.
From the system configuration menu (Para. 7.2) go to "Application" settings and select the "TEq-Link" option.
Then enter the IP address of the PC where the "TEq-Link Web Manager" software is installed, or enter the name of the PC itself – See
the following Figure.
Tap this key on the "System configuration menu" page; the following screen opens.
Select the "TEq-Link" option, which turns orange.
Application
In field (1), enter the IP address of the PC where the "TEq-Link Web Manager" software is installed.
Using any PC or mobile device in the same
network, by simply entering the IP in the browser
address bar. (A) or the name of the PC with the
"TEqLink Web Manager" software, the main page
for managing the saved tests opens (B).
Note: the same page also opens on the Tablet.
Tap this key on the home page of the app.
A
B
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
1
2015-M366-00 EN-121