Display Of Additional Measurements On Ride Heights - Dover Vsg Rav.td2Wf Übersetzung Der Originalanleitung

TABLE OF CONTENTS
7.5.4

Display of ADDITIONAL MEASUREMENTS on RIDE HEIGHTS

Some manufacturers (for example: Mercedes, Renault) provide angle tolerance values based on certain measurements on the vehicle
chassis.
1
The program shows a page like the one in the example below; scroll to view the different images, tap the image to enlarge it.
Scroll through the different heights/angles in the tables and select the correct values.
Scroll through heights or angles and select the correct values.
Enter the height
value in mm or the
angle in ° (degrees).
When the selected vehicle has angle tolerance values linked to additional measurements on the chassis,
key (1) is present on the technical data page.
Tap this key to view the page with details of the chassis measurements.
The measurements can be entered by selecting them from the tables, or:
tap this key, the following page is displayed where the values can be directly entered.
Tap this key to confirm the entered values.
Tap the image to enlarge it.
2015-M366-00
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
EN-103