Printing The Measurements - Dover Vsg Rav.td2Wf Übersetzung Der Originalanleitung

TABLE OF CONTENTS

7.16 PRINTING THE MEASUREMENTS

1
1 Vehicle data and customer data entry
2 Tapping on the icon allows a photo of the vehicle to be entered (2a)
3 The test can be saved if the TEq-Link function is configured (Para. 7.18)
Print preview.
Note:
If graphic printing is set, two
pages are generated, one with
the Diagnosis values and the
other with the Adjustment
values.
NOTE:
The printer is not included with the CCD2.0WiFi system. In any case, generic Wi-Fi printers compatible with Android or iOS can be
used, and they can be connected to the "connect" Wi-Fi network of the Access Point provided (Para. 3.7).
If there is no printer, the .pdf file of the test can be saved locally and exported at a later stage.
Tap this key on the test summary page (Para. 7.15).
The following screen appears, where the customer vehicle data can be entered.
Tap this key to go back to the front axle adjustment step (Para. 7.14).
Tap this key to display a print preview of the test (see figure below); the report is available in two formats
(graphic or tabular - see example on the following pages) configurable in the "PRINT" menu (Para. 7.2).
Tap this key again to produce the report (*).
Tap this key to end the test and go back to the home page.
2
3
2a
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
2015-M366-00 EN-117