Search Vehicles By Reg.number With "Shoot & Go - Dover Vsg Rav.td2Wf Übersetzung Der Originalanleitung

TABLE OF CONTENTS
7.5.2 Search vehicles by reg.number with "SHOOT & GO"
The "Shoot&Go" function is available as an option and in certain countries to select the vehicle being tested.
This function, once the reg.number has been entered, interrogates the relative Web service to identify the matching vehicle.
NOTE: to use the "Shoot&Go" feature, the Tablet must have Internet access; to do this, the WAN socket of the Access Point can be
connected to a data structure with Internet access, for example (Para 3.5).
A request must be submitted to the manufacturer beforehand to enable the function in the country of use, communicating the serial
number of your device.
If authorisation is granted, proceed with the system configuration.
Tap this key on the "System configuration menu" page; the following screen opens.
Application
Tap the button (which turns orange) and set the selector to ON.
1. Type the reg.number
in the field.
Countries enabled for
the service.
Change search mode:
Shoot&Go/Manual
selection
NOTE: if the "Shoot&Go" function is enabled, the central key symbolises a reg.number:
With the "Shoot&Go" function, tap this key to select the vehicle search mode.
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
2. Tap this
key to start
the search
Number of
credits
available
Shoot&Go
search
with photo
of Reg.
number
2015-M366-00 EN-99