Diagnosis And Adjustment Data Summary; Chassis Diagnosis - Dover Vsg Rav.td2Wf Übersetzung Der Originalanleitung

TABLE OF CONTENTS

7.15 DIAGNOSIS AND ADJUSTMENT DATA SUMMARY

Summary of diagnosis
data
7.15.1

Chassis diagnosis

This measurement is made during vehicle alignment (Para. 7.9).
EN-116 2015-M366-00
When front adjustment on the vehicle is complete and after tapping this key, the following screen
appears with the Diagnosis and Adjustment data summary
Tap this key to go to the vehicle and customer data entry step, where it is possible to print (Para. 7.16),
share the measurements made (Para. 7.17) or save the tests (if TEq-Link is present - Para. 7.18).
Tap this key; the program goes back to the preliminary operations (Para. 7.6).
Note: if considerable adjustments have been made, it is advisable to repeat the diagnosis starting from
the preliminary operations to correctly calculate the angular measurements.
Tap this key; the program displays the chassis diagnosis page (Para. 7.15.1)
Tap this key to go back to the rear adjustment step (Para. 7.13).
Tap this key on the Diagnosis data summary page and on the Diagnosis and Adjustment summary page;
a graphic representation of the vehicle with the set-back measurements (axle deviation) for the front
axle and for the rear axle will be displayed.
Tap this key to exit and go back to the previous step.
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
Summary of adjustments
made