Angle Measurement Error On The Horizontal Plane - Dover Vsg Rav.td2Wf Übersetzung Der Originalanleitung

TABLE OF CONTENTS
7.20.2

Angle measurement error on the horizontal plane

This error page indicates that one or more infrared measurements on the horizontal plane could not be made.
There may be multiple causes:
• One or more CCD sensors (digital transducer for measuring the angles on the horizontal plane) are not working.
• One or more infrared emitters for measuring the angles on the horizontal plane are not working (I.R. LED).
• There is an obstacle between the front and rear sensors.
If the cause of the malfunction is removed, the error page immediately disappears and the measurements page re-appears on the
screen. If the problem persists, the hardware needs to be checked. To do this, contact technical assistance.
EN-126 2015-M366-00
RAV.TD2WF
ROT.TD2WF
SPA.TD2WF
Arrows between
sensors