Gastroback ADVANCED CONTROL Bedienungsanleitung Seite 39

PROPERTIES OF YOUR NEW WAFFLE MAKER
Your new WAFFLE IRON ADVANCED CONTROL is perfectly suited for baking vari-
ous mixtures of light waffle batters easily and conveniently.
• Due to the variable lid hinge, the lid lowers onto the batter within the waffle are-
as evenly (see: 'Variable Lid Hinge').
• The non-stick coatings of the waffle plates enable healthy low-fat cooking, and
make it easy to remove the baked waffles.
• Via a smart control system, the baking time is determined automatically, whene-
ver making any settings (see: 'Smart Control'). The appliance detects the cold
batter on the pre-heated waffle areas, and starts the baking time automatically,
when the lid is closed after filling.
• Even quite different waffle batters are baked perfectly by selecting the appro-
priate settings. If required, you can control the baking cycle manually via the
„CUSTOM" program, using the displayed baking time just like an egg timer
(see: 'Pre-Defined Programs').
• For meeting your individual likings, use the texture functions and select the
desired browning (see: 'Texture Functions' and '7 Browning Levels').
• For storage, lock the lid to the base for conveniently moving the appliance by
the handle of the lid and for storing in the space-saving upright position (see:
'Locking the Lid to the Base').
LOCKING THE LID TO THE BASE
You may carry the appliance conveniently by the lid handle via the locking clip at
the lid and the lock jut at the base (see: 'Knowing Your New Waffle Maker'). For
this, simply close the lid and then turn the locking clip clockwise to the vertical clo-
sed position for engaging it at the lock jut. Thereafter, the lid will not open, when
moving the appliance by the handle and storing the appliance in a space-saving
upright position.
IMPORTANT - The vertical closed position of the locking clip may only be used
for moving and storing the appliance. For operation or cleaning, do not forget to
unlock the lid by turning the locking clip to the horizontal open position first. The-
reafter, the lid will open easily and without effort. Do not attempt to apply any
force for opening the lid to avoid damage.
VARIABLE LID HINGE
The lid of the WAFFLE IRON ADVANCED CONTROL is assembled with a floating
hinge. Therefore, during baking, the lid is lying evenly over the waffle plate at the
EN
76
base, avoiding that the batter is squeezed out at the front of the waffle areas. The-
refore, your waffles get an even thickness.
IMPORTANT - Nevertheless, do not overfill the waffle areas. The batter may not swell
out over the waffle plates. Use the measuring cup for measuring out the correct
amount. Please keep in mind that the volume of the batter increases during baking.
PFOA-FREE NON-STICK COATING
The waffle plates, hinge and moat are equipped with a non-stick coating. Thus, low-
fat baking is enabled and the cleaning effort is significantly reduced. The waffles do
not stick to the surfaces and can be removed easily. Additionally, you can remove
any normal residues of batter via a cloth, soft sponge or nylon brush and a little
dishwater (see: 'Care and Cleaning').
IMPORTANT - Do not use the appliance furthermore, when the non-stick coating is
damaged via overheating or improper treatment (e.g. usage of hard and sharp-edged
objects or improper cleaning; see: 'Important Safeguards / Non-Stick Coating').
SMART CONTROL
The smart control of the heating elements determines the baking time automatical-
ly, according to the selected settings and various other parameters. Therefore, your
waffles get the desired browning and texture (consistency) for each portion, you are
baking. As a result, the calculated baking time may vary with each portion—even if
you made no changes to any settings at all.
NOTE
The baking time may differ between 2 and 10 minutes, according to the settings.
Additionally, there may be a little difference from one portion to the other. The
browning indicator dashes flash during pre-heating. As soon as the dashes illumi-
nate continuously and the acoustic signal is given, you may start the baking cycle
via filling in the cold batter and closing the lid or via the restart button.
The calculated baking time is counted down on the LCD display. You simply wait
until the acoustic signal sounds (6 beeps), indicating the end of the baking time.
Then, check your waffles and take them out, when the desired consistency is rea-
ched (see: 'Operation / Baking the Waffle Batter'). The appliance keeps the waf-
fle plates hot automatically, thus being ready for starting the next baking cycle
immediately.
EN
77