Sntp Client Request-Interval; Sntp Client Broadcast-Rcv-Timeout - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Simple Network Time Protocol
(SNTP)
Parameter Value
unicast
P-1
broadcast

79.1.3 sntp client request-interval

Set the SNTP client request interval in seconds. \nThe request-interval is
only used in the operating-mode unicast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client request-interval <P-1>
Parameter Value
5..3600
P-1

79.1.4 sntp client broadcast-rcv-timeout

Set the SNTP client broadcast receive timeout in seconds. \nThe broadcast
receive timeout is only used in the operating-mode broadcast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client broadcast-rcv-timeout <P-1>
Parameter Value
128..2048
P-1
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
Meaning
Set the operating mode to unicast.
Set the operating mode to broadcast.
Meaning
Enter a number in the given range.
Meaning
Enter a number in the given range.
79.1 sntp
829