Sntp Client Operation; Sntp Client Operating-Mode - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Simple Network Time Protocol
(SNTP)
79.1 sntp
Configure SNTP settings.

79.1.1 sntp client operation

Enable or disable the SNTP client

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client operation

no sntp client operation
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no sntp client operation

79.1.2 sntp client operating-mode

Set the operating mode of the SNTP client. \nIn unicast-mode, the client
sends a request to the SNTP Server. \nIn broadcast-mode, the client waits
for a broadcast message from the SNTP Server.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client operating-mode <P-1>
828
79.1 sntp
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016