Inhaltszusammenfassung für Hirschmann HiOS-2S RSPL
Seite 1
Referenz-Handbuch Command Line Interface (CLI) HiOS-2S RSPL (Rail Switch Power Lite) RM CLI HiOS-2S RSPL Technische Unterstützung Release 5.0 05/2015 https://hirschmann-support.belden.eu.com...
Seite 2
Die beschriebenen Leistungsmerkmale sind nur dann verbindlich, wenn sie bei Vertragsschluss ausdrücklich vereinbart wurden. Diese Druckschrift wurde von Hirschmann Automation and Control GmbH nach bestem Wissen erstellt. Hirschmann behält sich das Recht vor, den Inhalt dieser Druckschrift ohne Ankündigung zu ändern. Hirschmann gibt keine Garantie oder Gewähr- leistung hinsichtlich der Richtigkeit oder Genauigkeit der Angaben in dieser Druckschrift.
Seite 8
12.3.6 show security-status all Dynamic Host Configuration Protocol (DHCP) 13.1 dhcp-server 13.1.1 dhcp-server operation 13.2 dhcp-server 13.2.1 dhcp-server operation 13.2.2 dhcp-server pool add 13.2.3 dhcp-server pool modify 13.2.4 dhcp-server pool mode 13.2.5 dhcp-server pool delete RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 9
15.3.2 policy-map name class add 15.3.3 policy-map name class name assign-queue 15.3.4 policy-map name class name conform-color 15.3.5 policy-map name class name drop 15.3.6 policy-map name class name mark 15.3.7 policy-map name class name mirror RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 10
DoS Mitigation 16.1 dos 16.1.1 dos tcp-null 16.1.2 dos tcp-xmas 16.1.3 dos tcp-syn-fin 16.1.4 dos tcp-min-header 16.1.5 dos icmp-fragmented 16.1.6 dos icmp payload-check 16.1.7 dos icmp payload-size 16.1.8 dos ip-land 16.1.9 dos tcp-offset RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 11
17.4.1 clear dot1x statistics port 17.4.2 clear dot1x statistics all 17.4.3 clear dot1x auth-history port 17.4.4 clear dot1x auth-history all IEEE 802.3ad (Dot3ad) 18.1 link-aggregation 18.1.1 link-aggregation add 18.1.2 link-aggregation modify 18.1.3 link-aggregation delete RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 12
Filtering Database (FDB) 19.1 mac-filter 19.1.1 mac-filter 19.2 bridge 19.2.1 bridge aging-time 19.3 show 19.3.1 show mac-filter-table static 19.4 show 19.4.1 show bridge aging-time 19.5 show 19.5.1 show mac-addr-table 19.6 clear 19.6.1 clear mac-addr-table HiDiscovery RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 13
23.1.1 ias-users add 23.1.2 ias-users delete 23.1.3 ias-users enable 23.1.4 ias-users disable 23.1.5 ias-users password 23.2 show 23.2.1 show ias-users IEC 61850 MMS Server 24.1 iec61850-mms 24.1.1 iec61850-mms operation 24.1.2 iec61850-mms write-access 24.1.3 iec61850-mms port RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 14
25.4.7 show igmp-snooping enhancements unknown-filte- ring 25.4.8 show igmp-snooping statistics global 25.4.9 show igmp-snooping statistics interface 25.5 show 25.5.1 show mac-filter-table igmp-snooping 25.6 clear 25.6.1 clear igmp-snooping Interface 26.1 shutdown 26.1.1 shutdown 26.2 auto-negotiate RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 15
27.1.2 utilization alarm-threshold lower 27.1.3 utilization alarm-threshold upper 27.2 clear 27.2.1 clear port-statistics 27.3 show 27.3.1 show interface counters 27.3.2 show interface utilization 27.3.3 show interface statistics 27.3.4 show interface ether-stats Intern 28.1 help 28.2 logout RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 16
29.4 show 29.4.1 show arp Link Backup 30.1 link-backup 30.1.1 link-backup operation 30.2 link-backup 30.2.1 link-backup add 30.2.2 link-backup delete 30.2.3 link-backup modify 30.3 show 30.3.1 show link-backup operation 30.3.2 show link-backup pairs RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 17
31.3.18lldp tlv portsec 31.3.19lldp tlv ptp Media Endpoint Discovery LLDP-MED 32.1 lldp 32.1.1 lldp med confignotification 32.1.2 lldp med transmit-tlv capabilities 32.1.3 lldp med transmit-tlv network-policy 32.2 lldp 32.2.1 lldp med faststartrepeatcount 32.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 18
33.3.4 copy traplog system envm 33.3.5 copy traplog system remote 33.3.6 copy audittrail system envm 33.3.7 copy audittrail system remote 33.4 clear 33.4.1 clear logging buffered 33.4.2 clear logging persistent 33.4.3 clear eventlog MAC Notification RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 19
37.1.1 modbus-tcp operation 37.1.2 modbus-tcp write-access 37.1.3 modbus-tcp port 37.1.4 modbus-tcp max-sessions 37.2 show 37.2.1 show modbus-tcp Media Redundancy Protocol (MRP) 38.1 mrp 38.1.1 mrp domain modify advanced-mode 38.1.2 mrp domain modify manager-priority RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 26
56.2.4 spanning-tree edge-port 56.2.5 spanning-tree guard-loop 56.2.6 spanning-tree guard-root 56.2.7 spanning-tree guard-tcn 56.2.8 spanning-tree cost 56.2.9 spanning-tree priority 56.3 show 56.3.1 show spanning-tree global 56.3.2 show spanning-tree mst 56.3.3 show spanning-tree port Secure Shell (SSH) RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 27
58.4.4 show mtu System 59.1 system 59.1.1 system name 59.1.2 system location 59.1.3 system contact 59.1.4 system pre-login-banner operation 59.1.5 system pre-login-banner text 59.1.6 system resources operation 59.2 temperature 59.2.1 temperature upper-limit 59.2.2 temperature lower-limit RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 28
61.2 show 61.2.1 show snmp traps User Management 62.1 show 62.1.1 show custom-role global 62.1.2 show custom-role commands Users 63.1 users 63.1.1 users add 63.1.2 users delete 63.1.3 users enable 63.1.4 users disable RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Nehmen Sie eine Maschine, die mittels Datenübertragung gesteuert wird, erst in Betrieb, wenn Sie alle Geräte zur Datenübertragung vollständig kon- figuriert haben. Das Nicht-Beachten dieser Anweisung kann zu Tod, schwerer Körperverletzung oder Materialschäden führen. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 32
Sicherheitshinweise RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Die in diesem Handbuch verwendeten Auszeichnungen haben folgende Bedeutungen: Aufzählung Arbeitsschritt Zwischenüberschrift Link Querverweis mit Verknüpfung Anmerkung: Eine Anmerkung betont eine wichtige Tatsache oder lenkt Ihre Aufmerksamkeit auf eine Abhängigkeit. ASCII-Darstellung in der grafischen Benutzeroberfläche Courier RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Sie über Wissen zu den Grundlagen und den Einsatz von Rail Switch Power Lite Geräten. Das Referenz-Handbuch "Command Line Interface" gibt Ihnen Schritt für Schritt Informationen zum Verwenden des Command Line Interface (CLI) und dessen Befehlen. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 38
Einführung A.1 Command Line Interface RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Zugang zum CLI B.1 Datenverbindung vorbereiten B.1 Datenverbindung vorbereiten Informationen zur Montage und Inbetriebnahme Ihres HiOS-2S RSPL-Gerä- tes finden Sie im Anwender-Handbuch „Installation“. Informationen zum Konfigurieren Ihres HiOS-2S RSPL-Gerätes finden Sie im Anwender-Handbuch „Konfiguration“. Einen Zugang zur Benutzeroberfläche des Command Line Interface erhalten Sie mit Hilfe des Freeware-Programms PuTTY.
Zugang zum CLI B.2 CLI über SSH (Secure Shell) B.2 CLI über SSH (Secure Shell) Starten Sie das Programm PuTTY auf Ihrem Rechner. PuTTY meldet sich mit dem Anmeldebildschirm. Abb. 1: PuTTY-Eingabemaske RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 42
SSH dauert der Verbindungsaufbau bis zu eine Minute. Bei der 1. Anmeldung an Ihrem Gerät zeigt PuTTY gegen Ende des Verbindungsaufbaus eine Sicherheitsalarmmeldung und bietet Ihnen die Möglichkeit, den Fingerabdruck des Schlüssels zu überprüfen. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 43
Erfahrenen Netzadministratoren bietet die OpenSSH-Suite eine weitere Möglichkeit, mittels SSH auf Ihr Gerät zuzugreifen. Zum Aufbau der Daten- verbindung geben Sie folgenden Befehl ein: ssh admin@10.149.112.53 admin stellt den Benutzernamen dar. 10.149.112.53 stellt die IP-Adresse Ihres Gerätes dar. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 44
Das Gerät bietet Ihnen die Möglichkeit, den Benutzernamen und das Passwort später im Command Line Interface zu ändern. Beachten Sie die Schreibweise in Groß-/Kleinbuchstaben. Das Gerät zeigt den Start-Bildschirm des CLI an. Anmerkung: Ändern Sie das Passwort gleich bei der 1. Inbetriebnahme. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 45
For the syntax of a particular command form, please consult the documentation. *(RSPL)> Abb. 4: Start-Bildschirm des CLI Ihr HiOS-2S RSPL meldet sich mit dem Eingabeprompt (RSPL) > RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Pinbelegung der V.24-Schnittstelle und des DB9-Steckers Einstellungen VT 100 Terminal Speed 9.600 Baud Data 8 bit Stopbit 1 bit Handshake Parity none Stellen Sie die seriellen Konfigurationsparameter des Terminal-Emulations- programmes wie folgt ein: RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 47
VT100 und drücken Sie eine Taste. Alternativ erstellen Sie die serielle Datenverbindung zum Gerät über V.24 mit PuTTY (siehe Abbildung 7). Drücken Sie die Eingabetaste. Abb. 7: Serielle Datenverbindung über V.24 mit PuTTY RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 48
Zugang zum CLI B.3 CLI über den V.24-Port Nach erfolgreichem Aufbau der Datenverbindung zeigt das Gerät ein Fenster für die Eingabe des Benutzernamens an. Copyright (c) 2011-2015 Hirschmann Automation and Control GmbH All rights reserved RSPL Release HiOS-2S-5.0 (Build date 2015-02-20 20:20)
Seite 49
Abb. 9: CLI-Bildschirm nach dem Einloggen Anmerkung: Sie haben die Möglichkeit, die V.24-Schnittstelle als Terminal- /CLI-Schnittstelle zu konfigurieren. Drücken Sie mehrfach eine beliebige Taste Ihrer Terminal-Tastatur, bis Ihnen der Login-Bildschirm den CLI-Modus signalisiert. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Öffnen Sie das Windows-Startfenster auf Ihrem Rechner mit Start>Ausführen.. Schreiben Sie in das Feld „Öffnen:“ den Befehl telnet <IP-Adresse des Gerätes> Abb. 10: Telnet-Verbindung zum HiOS-2S RSPL über Windows-Eingabefenster herstellen RM CLI HiOS-2S RSPL Release 5.0 05/2015...
DOS-Kommandozeileninterpreter auf Ihrem Rechner. Schreiben Sie den Befehl telnet <IP-Adresse des Gerätes> Abb. 11: Telnet-Verbindung zum HiOS-2S RSPL über DOS-Kommandozeile her- stellen B.4.2 Telnet-Verbindung über PuTTY Starten Sie das Programm PuTTY auf Ihrem Rechner. PuTTY meldet sich mit dem Anmeldebildschirm.
Seite 52
Klicken Sie auf „Open“, um die Datenverbindung zu Ihrem Gerät aufzu- bauen. Das CLI meldet sich auf dem Bildschirm mit einem Fenster für die Eingabe des Benutzernamens. Das Gerät bietet bis zu 5 Benutzern gleichzeitig die Möglichkeit, auf das Command Line Interface zuzugreifen. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 53
Passwort später im Command Line Interface zu ändern. Beachten Sie die Schreibweise in Groß-/Kleinbuchstaben. Das Gerät zeigt den Start-Bildschirm des CLI an. Copyright (c) 2011-2015 Hirschmann Automation and Control GmbH All rights reserved RSPL Release HiOS-2S-5.0 (Build date 2015-02-20 20:20)
Seite 54
Zugang zum CLI B.4 CLI-Zugang über Telnet Ihr HiOS-2S RSPL meldet sich mit dem Eingabeprompt (RSPL) > RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Benutzer. Weisen Sie diesen Wert zu, um das Benutzer- konto vorübergehend zu sperren. Wenn beim Zuweisen eines anderen Berechtigungsprofils ein Fehler auftritt, weist das Gerät dem Benutzer- konto diese Berechtigung zu. Tab. 1: Berechtigungsstufen und Umfang der Benutzerrechte RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 57
Bedienung des CLI C.1 Benutzerrechte Administrator Operator User Abb. 14: Berechtigungsstufen und Umfang der Benutzerrechte Weitere Informationen finden Sie im Anwenderhandbuch Grundkonfigu- ration. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Eine Ausnahme bilden die User-Exec-Modus Kommandos. Das CLI bietet Ihnen die Möglichkeit, diese Kommandos sowohl im User-Exec-Modus als auch im Privileged-Exec-Modus auszuführen. Die folgende Abbildung zeigt die Modi des Command Line Interface. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 59
Vlan Configure Exit Exit database Erweiterte VLAN- Global Configuration Modus VLAN Database Modus Konfigurationen Konfigu- rationen Interface Exit <slot/port> Konfigurationen Interface Range Modus an einem oder mehreren Ports Abb. 15: Struktur des CLI RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 60
(RSPL) ((Interface)all)# Einzelner Port an einem Interface Kommando-Prompt: (RSPL) (interface <slot/port>)# Beispiel: Beim Wechsel vom Global-Config-Modus in den Interface- Range-Modus ändert sich das Kommando-Prompt wie folgt: (RSPL) (config)#interface 2/1 (RSPL) (interface 2/1)# RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 61
Um den VLAN-Modus zu beenden ben Sie den Befehl vlan und in den Privileged-Exec-Modus database ein. zurückzukehren, geben Sie exit ein oder drücken Sie Ctrl-Z. (RSPL) #vlan database (RSPL) (Vlan)# (RSPL) (Vlan)#exit (RSPL) # Tab. 2: Kommando-Modi RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 62
Exit this session. ping Send ICMP echo packets to a specified IP address. show Display device options and settings. telnet Establish a telnet connection to a remote host. (RSPL)> Abb. 16: Kommandos im User-Exec-Modus RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Kommando komplett definiert und damit ausführbar ist. Das CLI prüft die Eingaben. Wenn ein Befehl und die Parameter korrekt und vollstän- dig sind, ist der Befehl durch Betätigen der Eingabetaste ausführbar. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Sie vom CLI einen Hinweis auf eine erkannte fehlerhafte Syntax des Befehls. Dieses Handbuch stellt die Befehle und Parameter in der Schriftart Cou- rier dar. Verwenden Sie Befehle und Parameter wie im Handbuch ab- gebildet (siehe Tabelle RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 65
Dieser Parameter stellt eine gültige MAC-Adresse dar. Die Adresse besteht aus 6 Hexadezimalzahlen vom Wert 00 bis FF. Die Zahlen werden durch Doppelpunkte getrennt, zum Beispiel 00:F6:29:B2:81:40. Tab. 4: Parameterwerte im Command Line Interface RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 66
Zeichenfolgen (Strings) Anführungszeichen markieren eine Zeichenfolge (String). Zum Beispiel „Systemname mit Leerzeichen”. Leerzeichen sind keine gültigen benut- zerdefinierten Strings. Ein Leerzeichen in einem Parameter geben Sie in- nerhalb von Anführungszeichen ein. Beispiel: RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enable or disable a RADIUS authentication server entry. [secret] Configure the shared secret for the RADIUS authentication server. [encrypted] Configure the encrypted shared secret. <cr> Press Enter to execute the command. „radius server auth modify“ ist die Befehlsbezeichnung. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 68
C.3 Ausführen von Kommandos Der Parameter <1..8> (RADIUS server index) ist notwendig. Der Werte- bereich des Parameters liegt bei 1 bis 8 (ganze Zahl). Die Parameter [name], [port], [msgauth], [primary], [status], [secret] und [encrypted] sind optional. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Interface-Range-Modus / Einzelner Port an einem Interface (RSPL) ((Interface)1/2-1/4)# Interface-Range-Modus / Eine Portreihe an einem Interface (RSPL) ((Interface)1/2,1/4,1/5)# Interface-Range-Modus / Eine Auflistung von einzelnen Ports (RSPL)((Interface)1/1-1/2,1/4-1/6)# Interface-Range-Modus / Eine Auflistung von Portreihen und einzel- nen Ports RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Das Gerätbietet Ihnen die Möglichkeit, das Eingabeprompt zu ändern. Das CLI unterstützt die folgenden Wildcards: Wildcard Description Systemdatum. Systemzeit. IP-Adresse des Gerätes. MAC-Adresse des Gerätes. Produktname des Gerätes. Tab. 6: Verwendung von Wildcards im CLI-Eingabeprompt RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Zeile erneut schreiben oder Inhalte einfügen CTRL + N Zur nächsten Zeile im Speicher wechseln CTRL + Z Zum Ursprung wechseln CTRL + G Laufende tcpdump-Ausgabe abbrechen Tab. 7: Tastenkombinationen im Command Line Interface RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 72
..return to root command prompt Ctrl-G ..aborts running tcpdump session Tab, <SPACE> command-line completion Exit ..go to next lower command prompt ..list choices (RSPL) # Abb. 17: Auflisten der Tastenkombinationen mit dem Help-Kommando RM CLI HiOS-2S RSPL Release 5.0 05/2015...
CLI den Befehl bis zum Beginn der Mehrdeutigkeit zu „log“. (RSPL) (Config)#log Nach dem erneuten Betätigen der Taste "Tab" oder "Leerzeichen" gibt Ihnen das CLI die Auswahlliste (logging, logout) aus. (RSPL) (Config)#log logging logout RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Durch Eingabe des dargestellten Befehls erhalten Sie eine Liste der ver- fügbaren Parameter zum Befehl show. Durch die Eingabe des Befehls ohne Leerzeichen vor dem Fragezeichen zeigt das Gerät den Hilfetext zum Befehl selbst: !*#(RSPL)(Config)#show? show Display device options and settings. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Das folgende Beispiel zeigt, wie Sie ein Kommando zur Einstellung der Management-IP-Adresse Ihres HiOS-2S RSPL finden und ausführen. Die IP-Adresse (a.b.c.d) besteht aus 4 Dezimalzahlen im Wert von 0 bis 255. Die 4 Dezimalzahlen sind durch einen Punkt getrennt. Im Lieferzu- stand steht dieser Wert auf 0.0.0.0.
Leerzeichen ein. Das CLI ergänzt den Befehl automatisch zu net- work parms. Geben Sie nach dem network parms ein Fragezeichen ein, um die weitere Verzweigung des Kommandos anzeigen zu lassen. (RSPL) #network parms ? <a.b.c.d> IP address. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
(RSPL) #show network parms ? <cr> Press Enter to execute the command. Geben Sie danach network und parms ein, um Ihre aktuellen Net- zeinstellungen auflisten zu lassen. Führen Sie den Befehl aus durch Betätigen der Eingabetaste. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 79
Beispiele D.1 IP-Adresse einstellen *(RSPL)#show network parms IPv4 Network ------------ Local IP address......10.115.10.100 Subnetmask........255.255.255.0 Gateway address......10.0.1.1 Burned in MAC address.......ec:e5:55:01:55:60 Protocol........none Management VLAN ID......1 Management VLAN priority....0 Management IP-DSCP value....0 *(RSPL)# RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Führen Sie den Befehl aus durch Betätigen der Eingabetaste. (RSPL)>enable !*(RSPL)#s? save Save configuration. script CLI Script File. serviceshell Enter system mode. show Display device options and settings. !*(RSPL)#save? [profile] Save configuration to profile. <cr> Press Enter to execute the command. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
2 ip 10.115.40.50 name radius- server2 radius server auth add 3 ip 10.115.50.60 port 1813 radius server auth add 4 ip 10.115.60.70 name radius- server4 port 1814 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 82
Beispiele D.3 Syntax des Kommandos „radius server auth add“ RM CLI HiOS-2S RSPL Release 5.0 05/2015...
D.3 Syntax des Kommandos „radius server auth add“ E Wartung Hirschmann arbeitet ständig an der Verbesserung und Weiterentwicklung der Software. Prüfen Sie regelmäßig, ob ein neuerer Stand der Software Ih- nen weitere Vorteile bietet. Informationen und Software-Downloads finden Sie auf den Hirschmann-Produktseiten im Internet (http://www.hirschmann.com).
Um die Service-Shell-Funktion zu starten, geben Sie im Privileged-Exec- Modus serviceshell oder ser und ein Leerzeichen ein und drücken die Eingabetaste. Um die Service-Shell-Funktion zu beenden, geben Sie exit ein und drücken die Eingabetaste. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 85
Reset the device (cold start). save Save configuration. serviceshell Enter system mode. Set device parameters. show Display device options and settings. traceroute Trace route to a specified host. !(RSPL) #serviceshell -> exit Au revoir! !*(RSPL) # RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Leerzeichen ein und drü- cken die Eingabetaste. Der Vorgang ist irreversibel. !(RSPL) >enable !(RSPL) #serviceshell? [deactivate] Disable the service shell access permanently (Cannot be undone). <cr> Press Enter to execute the command. !(RSPL) #serviceshell deactivate RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show address-conflict global 1.2.2 show address-conflict detected Displays the last detected address conflict. Mode: command is in all modes available Privilege Level: Guest Format: show address-conflict detected RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Address Conflict Detection (ACD) 1.2 show 1.2.3 show address-conflict fault-state Displays the current conflict status. Mode: command is in all modes available Privilege Level: Guest Format: show address-conflict fault-state RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 96
Address Conflict Detection (ACD) 1.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
2.2 show 2.2 show Display device options and settings. 2.2.1 show appllists Display ordered methods for application lists. Mode: command is in all modes available Privilege Level: Administrator Format: show appllists RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Authentication by local user DB radius Authentication by RADIUS server Authentication by IAS server 3.1.4 authlists enable Activate a login authentication list. Mode: Global Config Mode Privilege Level: Administrator Format: authlists enable <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
3.2 show 3.2 show Display device options and settings. 3.2.1 show authlists Display ordered methods for authentication lists. Mode: command is in all modes available Privilege Level: Administrator Format: show authlists RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 106
Authentication Lists 3.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Reset the specific interface and reactivate the port. Mode: Interface Range Mode Privilege Level: Operator Format: auto-disable reset [<P-1>] Parameter Value Meaning port Press Enter to execute the command. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 110
Auto Disable 4.2 auto-disable no auto-disable reset Disable the option Mode: Interface Range Mode Privilege Level: Operator Format: no auto-disable reset [<P-1>] RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show auto-disable brief 4.3.2 show auto-disable reasons Display summary of Auto Disable error reasons. Mode: command is in all modes available Privilege Level: Guest Format: show auto-disable reasons RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 112
Auto Disable 4.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Class Of Service 6.1 classofservice 6.1 classofservice Class of service configuration. 6.1.1 classofservice ip-dscp-mapping ip-dscp-mapping configuration Mode: Global Config Mode Privilege Level: Operator Format: classofservice ip-dscp-mapping <P-1> <P-2> <P-3> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 117
Class Of Service 6.1 classofservice RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 118
Class Of Service 6.1 classofservice Parameter Value Meaning af11 af12 af13 af21 af22 af23 af31 af32 af33 af41 af42 af43 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Operator Format: classofservice dot1p-mapping <P-1> <P-2> <P-3> Parameter Value Meaning 0..7 Enter the 802.1p priority. 0..7 Enter the Traffic Class value. 0..3 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Meaning untrusted Sets the class of service trust mode to un- trusted dot1p Sets the class of service trust mode to dot1p. ip-dscp Sets the class of service trust mode to IP DSCP. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Operator Format: cos-queue weighted <P-1> <P-2> Parameter Value Meaning 0..7 Enter a Queue Id from 0 to 7. 0..3 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: cos-queue min-bandwidth <P-1> <P-2> <P-3> Parameter Value Meaning 0..3 Enter a number in the given range. 0..7 Enter a Queue Id from 0 to 7. 0..100 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show classofservice ip-dscp-mapping 6.4.2 show classofservice dot1p-mapping Display a table containing the vlan priority to traffic class mappings. Mode: command is in all modes available Privilege Level: Guest Format: show classofservice dot1p-mapping RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: command is in all modes available Privilege Level: Guest Format: show classofservice trust 6.4.4 show cos-queue Show cosqueue parameters Mode: command is in all modes available Privilege Level: Guest Format: show cos-queue RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: cli prompt <P-1> Parameter Value Meaning string Enter a user-defined text, max. 128 charac- ters. Following wildcards are allowed: %d date, %t time, %i IP address, %m MAC address ,%p product name RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Privileged Exec Mode Privilege Level: Administrator Format: cli banner text <P-1> Parameter Value Meaning string Enter a user-defined text, max. 1024 charac- ters (allowed charaters are from ASCII 32 to 127). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show cli global 7.2.2 show cli command-tree Show a list of all commands. Mode: command is in all modes available Privilege Level: Guest Format: show cli command-tree RM CLI HiOS-2S RSPL Release 5.0 05/2015...
7.4 show Display device options and settings. 7.4.1 show logging cli-command Show the CLI command logging preferences. Mode: command is in all modes available Privilege Level: Guest Format: show logging cli-command RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 132
Command Line Interface (CLI) 7.4 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Local time offset (in minutes) with respect\nto UTC (positive values for loca- tions east of\nGreenwich). Mode: Global Config Mode Privilege Level: Administrator Format: clock timezone offset <P-1> Parameter Value Meaning -780..840 Edit the timezone offset (in minutes). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning disable Disable recurring summer-time mode. recurring Enable recurring summer-time mode. Enable recurring summer-time used in most parts of the European Union. Enable recurring summer-time used in most parts of the USA. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Sunday Monday Tuesday Wednesday Thursday Friday Saturday none January February March April June July August September October November December string <hh:mm> Present time in hh:mm format (00:00- 23:59). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Sunday Monday Tuesday Wednesday Thursday Friday Saturday none January February March April June July August September October November December string <hh:mm> Present time in hh:mm format (00:00- 23:59). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display device options and settings. 8.2.1 show clock Display the current time information. Mode: command is in all modes available Privilege Level: Guest Format: show clock [summer-time] [summer-time]: Display summer-time parameters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 140
Clock 8.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Save the configuration to the specific profile. Mode: All Privileged Modes Privilege Level: Operator Format: save profile <P-1> Parameter Value Meaning string Enter a user-defined text, max. 32 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the configuration undo timeout (unit: seconds). Mode: Global Config Mode Privilege Level: Operator Format: config watchdog timeout <P-1> Parameter Value Meaning 30..600 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: config envm load-priority <P-1> <P-2> Parameter Value Meaning SD-Card disable Config will not be loaded at all first Config will be loaded first. If successful, no other config will be tried. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Select the name of a profile to delete. Parameter Value Meaning non-volative memory envm external non-volative memory device 1..20 Index of the profile entry. string Enter a user-defined text, max. 32 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter a user-defined text, max. 32 charac- ters. string Enter hash as 40 hexa-decimal characters. 1..20 Index of the profile entry. string Enter hash as 40 hexa-decimal characters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Copy the system information and the event log from the device to external non-volatile memory. Mode: Privileged Exec Mode Privilege Level: Operator Format: copy sysinfoall system envm RM CLI HiOS-2S RSPL Release 5.0 05/2015...
(Re)-load a configuration from non-volatile memory to the running-config. remote: Copy a configuration from non-volatile memory to a server. Parameter Value Meaning string Filename. string Enter a user-defined text, max. 128 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Copy a configuration file from a server to non-volatile memory. [profile]: Copy a configuration from a server to a spicific profile in non- volatile memory. running-config: Copy a configuration file from a server to the running- config. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Show the currently running configuration (CLI script). Mode: command is in all modes available Privilege Level: Administrator Format: show running-config script [all] [all]: Show the currently running configuration (CLI script). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show config envm settings 9.6.2 show config envm properties Show the properties of the external non-volatile memory. Mode: command is in all modes available Privilege Level: Guest Format: show config envm properties RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: command is in all modes available Privilege Level: Administrator Format: show config profiles <P-1> [<P-2>] Parameter Value Meaning non-volative memory envm external non-volative memory device 1..20 Index of the profile entry. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
9.6.6 show config status Show the sync status of the running-config with non-volatile memory and ACA. Mode: command is in all modes available Privilege Level: Guest Format: show config status RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 160
Configuration 9.6 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
[filter]: Start capture with values from a filter file. [parms]: Start capture with the tcpdump parameters (for details see tcpdump help). Parameter Value Meaning string <filename> Enter a valid filename. string Enter a user-defined text, max. 255 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Copy the capture file from the device to a server. Mode: Privileged Exec Mode Privilege Level: Operator Format: copy tcpdumpcap nvm remote <P-1> Parameter Value Meaning string Enter a user-defined text, max. 128 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: copy tcpdumpfilter envm <P-1> nvm [<P-2>] nvm: Copy the capture filter from external non-volatile memory to non-volatile memory. Parameter Value Meaning string <filename> Enter a valid filename. string <filename> Enter a valid filename. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Copy the capture file from non-volatile memory to a server. Parameter Value Meaning string Filename. string <filename> Enter a valid filename. string Enter a user-defined text, max. 128 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enable or disable monitoring the condition of the power supply(s). Mode: Global Config Mode Privilege Level: Administrator Format: device-status monitor power-supply <P-1> Parameter Value Meaning 1..2 Number of power supply. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show device-status monitor 11.3.2 show device-status state Display the current state of the device. Mode: command is in all modes available Privilege Level: Guest Format: show device-status state RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show device-status events 11.3.5 show device-status link-alarm Display the monitor configurations of the network ports. Mode: command is in all modes available Privilege Level: Guest Format: show device-status link-alarm RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Device Monitoring 11.3 show 11.3.6 show device-status all Display the configurable device status settings. Mode: command is in all modes available Privilege Level: Guest Format: show device-status all RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 178
Device Monitoring 11.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show security-status monitor 12.3.2 show security-status state Display the current security status. Mode: command is in all modes available Privilege Level: Guest Format: show security-status state RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Device Security 12.3 show 12.3.6 show security-status all Display all security status settings. Mode: command is in all modes available Privilege Level: Guest Format: show security-status all RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: no dhcp-server pool mode <P-1> 13.2.5 dhcp-server pool delete Pool delete. Mode: Global Config Mode Privilege Level: Operator Format: dhcp-server pool delete <P-1> Parameter Value Meaning 1..128 Pool ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
13.3.2 show dhcp-server pool Show DHCP Server pool entries. Mode: command is in all modes available Privilege Level: Guest Format: show dhcp-server pool [<P-1>] Parameter Value Meaning 1..128 Pool ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show dhcp-server interface [<P-1>] Parameter Value Meaning slot no./port no. 13.3.4 show dhcp-server lease Show DHCP Server lease entries. Mode: command is in all modes available Privilege Level: Guest Format: show dhcp-server lease RM CLI HiOS-2S RSPL Release 5.0 05/2015...
This commands sets the Option-82 Remote ID to the IP address of device (if any assigned, else fails). Mode: VLAN Database Mode Privilege Level: Operator Format: dhcp-l2relay remote-id ip <P-1> Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
This commands sets the Option-82 Remote ID manually. If it is omitted then only the Circuit ID is inserted into a relayed DHCP message. Mode: VLAN Database Mode Privilege Level: Operator Format: dhcp-l2relay remote-id other <P-1> [<P-2>] RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 206
DHCP Layer 2 Relay 14.2 dhcp-l2relay Parameter Value Meaning 1..4042 Enter the VLAN ID. string <remote-id> Option 82 Remote ID RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show dhcp-l2relay global 14.5.2 show dhcp-l2relay statistics This command displays interface statistics specific to DHCP Layer 2 Relay. Mode: command is in all modes available Privilege Level: Guest Format: show dhcp-l2relay statistics RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show dhcp-l2relay interfaces 14.5.4 show dhcp-l2relay vlan This command displays the VLAN based DHCP Layer 2 Relay status. Mode: command is in all modes available Privilege Level: Guest Format: show dhcp-l2relay vlan RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 212
DHCP Layer 2 Relay 14.5 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Add a match condition based on the IP DSCP field. precedence: Add a match condition based on the IP precedence field. tos: Add a match condition based on the IP TOS field. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 216
P-12 IP subnet mask. A.B.C.D P-13 IP address. <a.b.c.d> P-14 IP subnet mask. domain P-15 domain echo echo ftpdata ftpdata http http smtp smtp snmp snmp telnet telnet tftp tftp 0-65535 Port number RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 217
0..7 P-18 Ip precedence value. string P-19 <00-ff> Tos bits/mask. string P-20 <00-ff> Tos bits/mask. icmp P-21 icmp igmp igmp 0-255 Protocol number RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Modify the queue id to which the associated traffic stream is assigned. Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 0..7 Assign queue id. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
All packets for the associated traffic stream are dropped at ingress. Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Marks all packets with the specified IP precedence value. Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 0..7 COS value. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 1..4294967295 Data rate (Kbps). 1..128 Burst size (KB). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 1..4294967295 Data rate (Kbps). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 1..4294967295 Data rate (Kbps). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 1..4294967295 Data rate (Kbps). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 1..4294967295 Data rate (Kbps). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. 1..4294967295 Data rate (Kbps). 1..128 Burst size (KB). 0..7 COS value. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 240
Parameter Value Meaning af11 af11 af12 af12 af13 af13 af21 af21 af22 af22 af23 af23 af31 af31 af32 af32 af33 af33 af41 af41 af42 af42 af43 af43 0..7 Ip precedence value. 0..7 COS value. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
All incoming packets for the associated traffic stream are redirec- ted to a specific egress interface. Parameter Value Meaning string Enter the DiffServ policy name, max. 31 cha- racters. string Enter the DiffServ class name, max. 31 cha- racters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show diffserv global 15.6.2 show diffserv service brief Display DiffServ policy summary information. Mode: Command is in all modes available.. Privilege Level: Guest Format: show diffserv service brief RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter the DiffServ class name, max. 31 cha- racters. 15.6.5 show policy-map all Show all Diffserv policies. Mode: Command is in all modes available.. Privilege Level: Guest Format: show policy-map all RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display a summary of policy-oriented statistics information for all interfaces in the specified direction. Mode: Command is in all modes available.. Privilege Level: Guest Format: show service-policy <P-1> Parameter Value Meaning Traffic direction in RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 251
Differentiated Services (DiffServ) 15.6 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 252
Differentiated Services (DiffServ) 15.6 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: no dos icmp-fragmented 16.1.6 dos icmp payload-check Enables ICMP max payload size protection for IPv4 and IPv6. Mode: Global Config Mode Privilege Level: Operator Format: dos icmp payload-check RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Operator Format: dos ip-land no dos ip-land Disable the option Mode: Global Config Mode Privilege Level: Operator Format: no dos ip-land RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Operator Format: dos tcp-syn no dos tcp-syn Disable the option Mode: Global Config Mode Privilege Level: Operator Format: no dos tcp-syn RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Operator Format: dos icmp-smurf-attack no dos icmp-smurf-attack Disable the option Mode: Global Config Mode Privilege Level: Operator Format: no dos icmp-smurf-attack RM CLI HiOS-2S RSPL Release 5.0 05/2015...
DoS Mitigation 16.2 show 16.2 show Display device options and settings. 16.2.1 show dos Show DoS Mitigation parameters Mode: command is in all modes available Privilege Level: Guest Format: show dos RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the maximum number of requests to be sent. Mode: Interface Range Mode Privilege Level: Operator Format: dot1x max-req <P-1> Parameter Value Meaning 1..10 Maximum number of requests (default: 2). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show dot1x auth-history [<P-1> [<P-2>]] Parameter Value Meaning slot no./port no. 1..4294967294 802.1X history log entry index. This can be specified only if interface is provi- ded.\nParameter Usage:[ <slot/port> [index] RM CLI HiOS-2S RSPL Release 5.0 05/2015...
17.3.5 show dot1x clients Display 802.1X client information. Mode: command is in all modes available Privilege Level: Guest Format: show dot1x clients [<P-1>] Parameter Value Meaning aa:bb:cc:dd:ee:ff MAC address. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
17.3.6 show dot1x statistics Display the 802.1X statistics for the specified port. Mode: command is in all modes available Privilege Level: Guest Format: show dot1x statistics <P-1> Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: link-aggregation modify <P-1> name <P-2> addport <P-3> deleteport <P-4> adminmode linktrap static min- links <P-5> name: Modify the name of the specified Link Aggregation Group. addport: Add the specified port to the Link Aggregation Group. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Delete the Link Aggregation Group to divide the group into individual connec- tions. Mode: Global Config Mode Privilege Level: Operator Format: link-aggregation delete <P-1> Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the collector max delay on this LAG (default is 0). Mode: Interface Range Mode Privilege Level: Operator Format: lacp collector-max-delay <P-1> Parameter Value Meaning 0..65535 Enter a number between 0 and 65535 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the value of the LACP actor admin key on this port(default 0). Mode: Interface Range Mode Privilege Level: Operator Format: lacp actor admin key <P-1> Parameter Value Meaning 0..65535 Enter a number between 0 and 65535 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: lacp actor admin state lacp-timeout no lacp actor admin state lacp-timeout Disable the option Mode: Interface Range Mode Privilege Level: Operator Format: no lacp actor admin state lacp-timeout RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set LACP actor port priority value (default 128). Mode: Interface Range Mode Privilege Level: Operator Format: lacp actor admin port priority <P-1> Parameter Value Meaning 0..65535 Enter a number between 0 and 65535 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
18.2.15lacp partner admin system-priority Configure the partener system priority. Mode: Interface Range Mode Privilege Level: Operator Format: lacp partner admin system-priority <P-1> Parameter Value Meaning 0..65535 Enter a number between 0 and 65535 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the MAC address representing the administrative value of the LAG ports protocol partner system ID default (00:00:00:00:00:00). Mode: Interface Range Mode Privilege Level: Operator Format: lacp partner admin system-id <P-1> Parameter Value Meaning aa:bb:cc:dd:ee:ff MAC address. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
18.3.2 show link-aggregation statistics Show ports LAG statistics. Mode: command is in all modes available Privilege Level: Guest Format: show link-aggregation statistics [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
18.3.5 show lacp mode Show lacp mode. Mode: command is in all modes available Privilege Level: Guest Format: show lacp mode [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
18.3.8 show lacp partner admin Show administrative partner attributes. Mode: command is in all modes available Privilege Level: Guest Format: show lacp partner admin [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 290
IEEE 802.3ad (Dot3ad) 18.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: mac-filter <P-1> <P-2> Parameter Value Meaning aa:bb:cc:dd:ee:ff MAC address. 1..4042 Enter the VLAN ID. no mac-filter Disable the option Mode: Global Config Mode Privilege Level: Operator Format: no mac-filter <P-1> <P-2> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Bridge configuration. 19.2.1 bridge aging-time Aging time configuration. Mode: Global Config Mode Privilege Level: Operator Format: bridge aging-time <P-1> Parameter Value Meaning 10..500000 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
19.3 show Display device options and settings. 19.3.1 show mac-filter-table static Displays the MAC address filter table. Mode: command is in all modes available Privilege Level: Guest Format: show mac-filter-table static RM CLI HiOS-2S RSPL Release 5.0 05/2015...
19.4 show 19.4 show Display device options and settings. 19.4.1 show bridge aging-time Address aging time. Mode: command is in all modes available Privilege Level: Guest Format: show bridge aging-time RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Displays the MAC address table. Mode: command is in all modes available Privilege Level: Guest Format: show mac-addr-table [<P-1>] Parameter Value Meaning a:b:c:d:e:f Enter a MAC address. 1..4042 Enter a VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
20.2 show 20.2 show Display device options and settings. 20.2.1 show network hidiscovery Show the HiDiscovery settings. Mode: command is in all modes available Privilege Level: Guest Format: show network hidiscovery RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 304
HiDiscovery 20.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning 1..65535 Port number of the HTTP server (default: 80). 21.1.2 http server Enable or disable the HTTP server. Mode: Global Config Mode Privilege Level: Administrator Format: http server RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 307
Hypertext Transfer Protocol (HTTP) 21.1 http no http server Disable the option Mode: Global Config Mode Privilege Level: Administrator Format: no http server RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Hypertext Transfer Protocol (HTTP) 21.2 show 21.2 show Display device options and settings. 21.2.1 show http Show HTTP server information. Mode: command is in all modes available Privilege Level: Guest Format: show http RM CLI HiOS-2S RSPL Release 5.0 05/2015...
22.1.2 https port Set the HTTPS port number. Mode: Global Config Mode Privilege Level: Administrator Format: https port <P-1> Parameter Value Meaning 1..65535 Port number of the web server (default: 443). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Administrator Format: copy httpscert remote <P-1> nvm nvm: Copy HTTPS certificate (PEM) from a server to the device. Parameter Value Meaning string Enter a user-defined text, max. 128 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
HTTP Secure (HTTPS) 22.3 show 22.3 show Display device options and settings. 22.3.1 show https Show HTTPS server information. Mode: command is in all modes available Privilege Level: Guest Format: show https RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 314
HTTP Secure (HTTPS) 22.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
23.2 show Display device options and settings. 23.2.1 show ias-users Display IAS users and user accounts information. Mode: command is in all modes available Privilege Level: Administrator Format: show ias-users RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Defines the port number of the IEC61850 MMS server (default: 102). Mode: Global Config Mode Privilege Level: Operator Format: iec61850-mms port <P-1> Parameter Value Meaning 1..65535 Port number of the IEC61850 MMS server (de- fault: 102). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
24.2 show 24.2 show Display device options and settings. 24.2.1 show iec61850-mms Show the IEC61850 MMS Server settings. Mode: command is in all modes available Privilege Level: Guest Format: show iec61850-mms RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 324
IEC 61850 MMS Server 24.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Sets the IGMP querier timer expiration period (60-300) in seconds. Mode: Global Config Mode Privilege Level: Operator Format: igmp-snooping querier timer-expiry <P-1> Parameter Value Meaning 60..300 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: igmp-snooping forward-unknown <P-1> Parameter Value Meaning discard Unknown multicast frames will be discarded. flood Unknown multicast frames will be flooded. query-ports Unknown multicast frames will be forwarded only to query ports. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enable or disable IGMP snooping static-query-port. automatic-mode: Enable or disable IGMP snooping automatic-mode. Parameter Value Meaning 1..4042 Enter the VLAN ID. 2..3600 Enter a number in the given range. 1..25 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set the igmp maximum response time (1-25) in seconds per interface. Mode: Interface Range Mode Privilege Level: Operator Format: igmp-snooping maxresponse <P-1> Parameter Value Meaning 1..25 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
25.4.2 show igmp-snooping interface Show IGMP snooping interface information. Mode: command is in all modes available Privilege Level: Guest Format: show igmp-snooping interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Show IGMP snooping querier VLAN information. Mode: command is in all modes available Privilege Level: Guest Format: show igmp-snooping querier vlan [<P-1>] Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show igmp-snooping enhancements unknown-filte- ring 25.4.8 show igmp-snooping statistics global Show number of control packets processed by CPU. Mode: command is in all modes available Privilege Level: Guest Format: show igmp-snooping statistics global RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Show number of control packets processed by CPU per interface. Mode: command is in all modes available Privilege Level: Guest Format: show igmp-snooping statistics interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display device options and settings. 25.5.1 show mac-filter-table igmp-snooping Display IGMP snooping entries in the MFDB table. Mode: command is in all modes available Privilege Level: Guest Format: show mac-filter-table igmp-snooping RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Interface Range Mode Privilege Level: Operator Format: auto-power-down <P-1> Parameter Value Meaning auto-power-save The port goes in a low power mode. no-power-save The port does not use the automatic power save mode. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Operator Format: cable-crossing <P-1> Parameter Value Meaning The port does not use the crossover mode. mdix The port uses the crossover mode. auto-mdix The port uses the auto crossover mode. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set or remove a descriptive name for the interface. Mode: Interface Range Mode Privilege Level: Operator Format: name <P-1> Parameter Value Meaning string Enter a user-defined text, max. 64 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: mac-filter <P-1> <P-2> Parameter Value Meaning aa:bb:cc:dd:ee:ff MAC address. 1..4042 Enter the VLAN ID. no mac-filter Disable the option Mode: Interface Range Mode Privilege Level: Operator Format: no mac-filter <P-1> <P-2> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display device options and settings. 26.11.1show port Show interface parameters. Mode: command is in all modes available Privilege Level: Guest Format: show port [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
26.12 show 26.12show Display device options and settings. 26.12.1show led-signaling operation Show Port LED signaling operation. Mode: command is in all modes available Privilege Level: Guest Format: show led-signaling operation RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 354
Interface 26.12 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Interface Range Mode Privilege Level: Operator Format: utilization alarm-threshold lower <P-1> Parameter Value Meaning 0..10000 Add alarm threshold lower value for monito- ring bandwidth utilization in hundredths of a percent. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Interface Range Mode Privilege Level: Operator Format: utilization alarm-threshold upper <P-1> Parameter Value Meaning 0..10000 Add alarm threshold upper value for monito- ring bandwidth utilization in hundredths of a percent. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show interface counters 27.3.2 show interface utilization Show interface utilization. Mode: command is in all modes available Privilege Level: Guest Format: show interface utilization [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
27.3.4 show interface ether-stats Show detailed interface statistics. Mode: command is in all modes available Privilege Level: Guest Format: show interface ether-stats [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Intern 28.1 help 28.1 help Display help for various special keys. Mode: command is in all modes available Privilege Level: Guest Format: help RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Intern 28.3 history 28.3 history Show a list of previously run commands. Mode: command is in all modes available Privilege Level: Guest Format: history RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter VLAN range seperated by hyphen e.g 1- vlan list Enter VLAN list seperated by comma e.g 2,4,6,..complex range Enter VLAN range and several VLAN seperated by comma for a list and hyphen for ranges e.g 2-4,6-9,11. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter a number in the given range. 1..10 Enter a number in the given range. 0..255 Enter a number in the given range. 0..65507 Enter a number in the given range. 1..65535 Enter port number between 1 and 65535 RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Schedule reboot after specified time. Mode: All Privileged Modes Privilege Level: Administrator Format: reboot after <P-1> Parameter Value Meaning 0..2147483 Enter Seconds Between 0 to 2147483. Setting 0 will clear scheduled Reboot if configured. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Intern 28.10 ping 28.10ping Send ICMP echo packets to a specified IP address. Mode: command is in all modes available Privilege Level: Guest Format: ping RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: command is in all modes available Privilege Level: Guest Format: show reboot 28.11.2show serviceshell Display the service shell access. Mode: command is in all modes available Privilege Level: Guest Format: show serviceshell RM CLI HiOS-2S RSPL Release 5.0 05/2015...
29.3 show 29.3 show Display device options and settings. 29.3.1 show network parms Show network settings. Mode: command is in all modes available Privilege Level: Guest Format: show network parms RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Internet Protocol Version 4 (IPv4) 29.4 show 29.4 show Display device options and settings. 29.4.1 show arp Show ARP table. Mode: command is in all modes available Privilege Level: Guest Format: show arp RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 378
Internet Protocol Version 4 (IPv4) 29.4 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display Link Backup interface pairs. Mode: command is in all modes available Privilege Level: Guest Format: show link-backup pairs [<P-1>] [<P-2>] Parameter Value Meaning slot no./port no. slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 384
Link Backup 30.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter the LLDP re-initialization delay in seconds. Mode: Global Config Mode Privilege Level: Operator Format: lldp config chassis re-init-delay <P-1> Parameter Value Meaning 1..10 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter the LLDP transmit interval in seconds. Mode: Global Config Mode Privilege Level: Operator Format: lldp config chassis tx-interval <P-1> Parameter Value Meaning 5..32768 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
31.2.2 show lldp port Display port specific LLDP configurations. Mode: command is in all modes available Privilege Level: Guest Format: show lldp port [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
31.2.3 show lldp remote-data Remote information collected with LLDP. Mode: command is in all modes available Privilege Level: Guest Format: show lldp remote-data [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
1..50 Enter a number in the given range. 31.3.4 lldp notification Enable or disable the LLDP notification operation for interface. Mode: Interface Range Mode Privilege Level: Operator Format: lldp notification RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Operator Format: lldp med faststartrepeatcount <P-1> Parameter Value Meaning 1..10 Enter a value representing the number of LLDP PDUs that will be transmitted.Default is 3. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display the current LLDP-MED configuration on a specific port. Mode: command is in all modes available Privilege Level: Guest Format: show lldp med interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display LLDP-MED summary configuration for a remote device. Mode: command is in all modes available Privilege Level: Guest Format: show lldp med remote-device summary [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
[port]: Enter the UDP port used for syslog server transmission. [severity]: Configure the minimum severity level to be sent to this syslog server. [type]: Configure the type of log messages to be sent to the syslog server. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Same as alert Same as critical Same as error Same as warning Same as notice Same as informational Same as debug systemlog the system event log entries audittrail the audit trail log entries RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Same as notice Same as informational Same as debug 33.1.11logging console operation Enable or disable logging to the local V.24 console. Mode: Global Config Mode Privilege Level: Administrator Format: logging console operation RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Normal but significant conditions. informational Informational messages. debug Debug-level messages. Same as emergency Same as alert Same as critical Same as error Same as warning Same as notice Same as informational Same as debug RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: no logging persistent operation 33.1.14logging persistent numfiles Enter the maximum number of log files. Mode: Global Config Mode Privilege Level: Administrator Format: logging persistent numfiles <P-1> Parameter Value Meaning 0..25 number of logfiles RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Maximum persistent logfile size on the non- volatile memory in kBytes 33.1.16logging persistent severity-level Configure the minimum severity level to be logged into files. Mode: Global Config Mode Privilege Level: Administrator Format: logging persistent severity-level <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 418
Normal but significant conditions. informational Informational messages. debug Debug-level messages. Same as emergency Same as alert Same as critical Same as error Same as warning Same as notice Same as informational Same as debug RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show logging persistent [logfiles] [logfiles]: List the persistent log files. 33.2.5 show logging syslog Display current syslog operational setting. Mode: command is in all modes available Privilege Level: Guest Format: show logging syslog RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Logging 33.2 show 33.2.6 show logging host Display a list of logging hosts currently configured. Mode: command is in all modes available Privilege Level: Guest Format: show logging host RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Copy the traplog from the device to external non-volatile memory. Mode: Privileged Exec Mode Privilege Level: Operator Format: copy traplog system envm <P-1> Parameter Value Meaning string Enter a user-defined text, max. 32 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Copy the audit trail from the device to a file server. Mode: Privileged Exec Mode Privilege Level: auditor Format: copy audittrail system remote <P-1> Parameter Value Meaning string Enter a user-defined text, max. 128 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
34.1.2 mac notification interval Set MAC notification interval in seconds. Mode: Global Config Mode Privilege Level: Operator Format: mac notification interval <P-1> Parameter Value Meaning 0..2147483647 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show mac notification global 34.3.2 show mac notification interface Displays MAC notification interface information. Mode: command is in all modes available Privilege Level: Guest Format: show mac notification interface RM CLI HiOS-2S RSPL Release 5.0 05/2015...
[ip]: Configure IP address which should have access to management. [mask]: Configure network mask to allow a subnet for management access. [http]: Configure if HTTP is allowed to have management access. [https]: Configure if HTTPS is allowed to have management access. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enable the option. disable Disable the option. enable Enable the option. disable Disable the option. enable Enable the option. disable Disable the option. enable P-10 Enable the option. disable Disable the option. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning 1..16 Pool entry index. no network management access status Disable the option Mode: Privileged Exec Mode Privilege Level: Administrator Format: no network management access status <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
35.2.2 show network management access rules Show restricted management access rules. Mode: command is in all modes available Privilege Level: Guest Format: show network management access rules [<P-1>] Parameter Value Meaning 1..16 Pool entry index. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display device options and settings. 36.2.1 show network management Show configuration of management access, VLAN and address. Mode: command is in all modes available Privilege Level: Guest Format: show network management RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 442
Management Address 36.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enable or disable the write-access on Modbus/TCP registers. - Possible se- curity risk, as Modbus/TCP communication is not authenticated - . Mode: Global Config Mode Privilege Level: Operator Format: modbus-tcp write-access RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Defines the maximum number of concurrent Modbus/TCP sessions (default: Mode: Global Config Mode Privilege Level: Operator Format: modbus-tcp max-sessions <P-1> Parameter Value Meaning 1..5 Maximum number of concurrent Modbus/TCP ser- ver sessions (default: 5). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
37.2 show 37.2 show Display device options and settings. 37.2.1 show modbus-tcp Show the Modbus/TCP server settings. Mode: command is in all modes available Privilege Level: Guest Format: show modbus-tcp RM CLI HiOS-2S RSPL Release 5.0 05/2015...
38.1.10mrp domain modify vlan Configure the VLAN identifier of the MRP domain.\n(VLAN ID 0 means that no VLAN is used). Mode: Global Config Mode Privilege Level: Operator Format: mrp domain modify vlan <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Media Redundancy Protocol (MRP) 38.2 show 38.2 show Display device options and settings. 38.2.1 show mrp Show MRP settings. Mode: command is in all modes available Privilege Level: Guest Format: show mrp RM CLI HiOS-2S RSPL Release 5.0 05/2015...
An instance of the timer is required for each state machine in the leave state. Mode: Interface Range Mode Privilege Level: Operator Format: mrp-ieee global leave-time <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
PDUs. The timer is required on a per-Port, per-MRP Participant basis. Mode: Interface Range Mode Privilege Level: Operator Format: mrp-ieee global leave-all-time <P-1> Parameter Value Meaning 200..6000 Leave-All time-interval in centi-seconds. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Show the global configuration of IEEE multiple registration protocol per inter- face. Mode: command is in all modes available Privilege Level: Guest Format: show mrp-ieee global interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
40.2.2 show mrp-ieee mmrp interface Display the IEEE MMRP interface configuration. Mode: command is in all modes available Privilege Level: Guest Format: show mrp-ieee mmrp interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Show Forward-All setting for port in given VLAN. Mode: command is in all modes available Privilege Level: Guest Format: show mrp-ieee mmrp service-requirement forward- all vlan [<P-1>] Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Show Forward-All setting for port in given VLAN. Mode: command is in all modes available Privilege Level: Guest Format: show mrp-ieee mmrp service-requirement forbidden vlan [<P-1>] Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display device options and settings. 40.6.1 show mac-filter-table mmrp Display MMRP entries in the MFDB table. Mode: command is in all modes available Privilege Level: Guest Format: show mac-filter-table mmrp RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 470
MRP IEEE MMRP 40.6 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
41.3.2 show mrp-ieee mvrp interface Display the IEEE MVRP interface configuration. Mode: command is in all modes available Privilege Level: Guest Format: show mrp-ieee mvrp interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
41.3.4 show mrp-ieee mvrp statistics interface Display the IEEE MVRP interface statistics. Mode: command is in all modes available Privilege Level: Guest Format: show mrp-ieee mvrp statistics interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the CRC-Fragment counter in parts per million (1-1000000 [ppm]). Default 1000 [ppm]. Mode: Interface Range Mode Privilege Level: Operator Format: port-monitor condition crc-fragments count <P-1> Parameter Value Meaning 1..1000000 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the measure interval in seconds (1-180s) for Link Flap detection. Default 10. Mode: Interface Range Mode Privilege Level: Operator Format: port-monitor condition link-flap interval <P-1> Parameter Value Meaning 1..180 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure Overload detection condition threshold type upper-threshold. Mode: Interface Range Mode Privilege Level: Operator Format: port-monitor condition overload-detection upper- threshold <P-1> Parameter Value Meaning 0..10000000 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure Overload detection condition detection interval. Mode: Interface Range Mode Privilege Level: Operator Format: port-monitor condition overload-detection polling-interval <P-1> Parameter Value Meaning 1..20 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: port-monitor reset [<P-1>] Parameter Value Meaning port Press Enter to execute the command. no port-monitor reset Disable the option Mode: Interface Range Mode Privilege Level: Operator Format: no port-monitor reset [<P-1>] RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show port-monitor operation 42.3.2 show port-monitor brief Display the Port Monitor summary. Mode: command is in all modes available Privilege Level: Guest Format: show port-monitor brief RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display the Port Monitor link speed and duplex interface settings. Mode: command is in all modes available Privilege Level: Guest Format: show port-monitor speed-duplex [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
42.3.8 show port-monitor crc-fragments Display CRC-Fragments counts for a specific interface. Mode: command is in all modes available Privilege Level: Guest Format: show port-monitor crc-fragments <P-1> Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set dynamic limit for the interface. Mode: Interface Range Mode Privilege Level: Operator Format: port-security max-dynamic <P-1> Parameter Value Meaning 0..600 maximum number of dynamically locked MAC ad- dresses allowed RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: port-security violation-traps operation [fre- quency <P-1>] operation: Enable/Disable SNMP violation traps for the interface. [frequency]: The minimum seconds between two successive violation traps on this port. Parameter Value Meaning 0..3600 time in seconds RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 498
Port Security 43.2 port-security no port-security violation-traps Disable the option Mode: Interface Range Mode Privilege Level: Operator Format: no port-security violation-traps operation [frequency] RM CLI HiOS-2S RSPL Release 5.0 05/2015...
43.3.2 show port-security interface Display port-security (port MAC locking) information for system. Mode: command is in all modes available Privilege Level: Guest Format: show port-security interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
43.3.5 show port-security violation Display port security violation information. Mode: command is in all modes available Privilege Level: Guest Format: show port-security violation <P-1> Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
44.1.2 passwords max-login-attempts Set maximum login attempts for the users. Mode: Global Config Mode Privilege Level: Administrator Format: passwords max-login-attempts <P-1> Parameter Value Meaning 0..5 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
44.1.5 passwords min-numeric-chars Set minimum numeric characters for user passwords. Mode: Global Config Mode Privilege Level: Administrator Format: passwords min-numeric-chars <P-1> Parameter Value Meaning 0..16 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
44.1.6 passwords min-special-chars Set minimum special characters for user passwords. Mode: Global Config Mode Privilege Level: Administrator Format: passwords min-special-chars <P-1> Parameter Value Meaning 0..16 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
44.2 show 44.2 show Display device options and settings. 44.2.1 show passwords Display password policies and options. Mode: command is in all modes available Privilege Level: Administrator Format: show passwords RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 506
Password Management 44.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
45.2.2 radius server attribute 4 Specifies the RADIUS client to use the NAS-IP Address attribute in the RA- DIUS requests. Mode: Global Config Mode Privilege Level: Administrator Format: radius server attribute 4 <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
45.2.9 radius server retransmit Configure the retransmit value for the RADIUS server. Mode: Global Config Mode Privilege Level: Administrator Format: radius server retransmit <P-1> Parameter Value Meaning 1..15 Maximum number of retransmissions (default: RM CLI HiOS-2S RSPL Release 5.0 05/2015...
45.2.10radius server timeout Configure the RADIUS server timeout value. Mode: Global Config Mode Privilege Level: Administrator Format: radius server timeout <P-1> Parameter Value Meaning 1..30 Timeout in seconds (default: 5). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
45.3.2 show radius auth servers Display all configured RADIUS authentication servers. Mode: command is in all modes available Privilege Level: Guest Format: show radius auth servers [<P-1>] Parameter Value Meaning 1..8 RADIUS server index. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
45.3.5 show radius acct servers Display all configured RADIUS accounting servers. Mode: command is in all modes available Privilege Level: Guest Format: show radius acct servers [<P-1>] Parameter Value Meaning 1..8 RADIUS server index. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter an object identifier of the particular variable to be sampled, max. 32 characters. 1..2147483647 Enter the rising threshold for the sampled statistic. 1..2147483647 Enter the falling threshold for the sampled statistic. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Delete RMON alarm. Mode: Global Config Mode Privilege Level: Operator Format: rmon-alarm delete <P-1> Parameter Value Meaning 1..150 Enter an index that uniquely identifies an entry in the alarm table. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Variable is compared directly with the th- resholds. deltaValue Variable is subtracted from the current value and the difference compared with the thresholds. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 523
1..65535 Enter the index of the eventEntry that is used when a rising threshold is crossed. 1..65535 Enter the index of the eventEntry that is used when a falling threshold is crossed. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show rmon statistics [<P-1>] Parameter Value Meaning slot no./port no. 46.2.2 show rmon alarm Display configuration on RMON alarms. Mode: command is in all modes available Privilege Level: Guest Format: show rmon alarm RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 531
Script File 47.2 copy Parameter Value Meaning string Enter a user-defined text, max. 128 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Displays the content of the CLI script file present in the device. Mode: command is in all modes available Privilege Level: Administrator Format: show script system <P-1> Parameter Value Meaning string Filename. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enable or disable the RAM selftest on cold start of the device. When disabled the device booting time is reduced. Mode: Global Config Mode Privilege Level: Administrator Format: selftest ramtest RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show selftest action 48.2.2 show selftest settings Displays the selftest settings. Mode: command is in all modes available Privilege Level: Guest Format: show selftest settings RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 538
Selftest 48.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
49.1.1 show sfp Show info about plugged in SFP modules Mode: command is in all modes available Privilege Level: Guest Format: show sfp [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
The signal contact's status is determined by the\ndevice status. security-status The signal contact's status is determined by the\nsecurity status. dev-sec-status The signal contact's status is determined by the\ndevice status and security status. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: signal-contact <P-1> monitor temperature Parameter Value Meaning signal contact no. no signal-contact monitor temperature Disable the option Mode: Global Config Mode Privilege Level: Administrator Format: no signal-contact <P-1> monitor temperature RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Sets the monitoring of the power supply(s). Mode: Global Config Mode Privilege Level: Administrator Format: signal-contact <P-1> monitor power-supply <P-2> Parameter Value Meaning signal contact no. 1..2 Number of power supply. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure if a trap is sent when the Signal Contact\nchanges state (in monitor mode). Mode: Global Config Mode Privilege Level: Administrator Format: signal-contact <P-1> trap Parameter Value Meaning signal contact no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 547
Signal Contact 50.1 signal-contact no signal-contact trap Disable the option Mode: Global Config Mode Privilege Level: Administrator Format: no signal-contact <P-1> trap RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display the settings of the monitoring of the specific\nnetwork ports. events: Display occurred device status events. all: Display all signal contact settings for the specified\nsignal contact. Parameter Value Meaning signal contact no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 550
Signal Contact 50.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Packets that are received on the source in- terfaces are copied to the destination in- terface. txrx Packets that are transmitted or received on the source interfaces are copied to the des- tination interface. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 553
Switched Monitoring (SMON) 51.1 monitor no monitor session Disable the option Mode: Global Config Mode Privilege Level: Operator Format: no monitor session <P-1> destination interface source port-list interface direction mode RM CLI HiOS-2S RSPL Release 5.0 05/2015...
51.2.1 show monitor session Display port monitor session settings. Mode: command is in all modes available Privilege Level: Guest Format: show monitor session <P-1> Parameter Value Meaning Monitor session index. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
52.1.4 snmp access port Configure the SNMP access port. Mode: Global Config Mode Privilege Level: Administrator Format: snmp access port <P-1> Parameter Value Meaning 1..65535 Port number of the SNMP server (default: 161). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
52.2 show Display device options and settings. 52.2.1 show snmp access Show SNMP access configuration settings. Mode: command is in all modes available Privilege Level: Guest Format: show snmp access RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 562
Simple Network Management 52.2 show Protocol (SNMP) RM CLI HiOS-2S RSPL Release 5.0 05/2015...
53.2 show 53.2 show Display device options and settings. 53.2.1 show snmp community Display SNMP v1/2 community. Mode: command is in all modes available Privilege Level: Administrator Format: show snmp community RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 566
SNMP Community 53.2 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Disable logging of SNMP GET or SET requests. no logging snmp-request get operation Disable the option Mode: Global Config Mode Privilege Level: Administrator Format: no logging snmp-request get operation <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Same as debug 54.1.3 logging snmp-request set operation Enable or disable logging of SNMP GET or SET requests. Mode: Global Config Mode Privilege Level: Administrator Format: logging snmp-request set operation <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Administrator Format: no logging snmp-request set operation <P-1> 54.1.4 logging snmp-request set severity Define severity level. Mode: Global Config Mode Privilege Level: Administrator Format: logging snmp-request set severity <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 571
Normal but significant conditions. informational Informational messages. debug Debug-level messages. Same as emergency Same as alert Same as critical Same as error Same as warning Same as notice Same as informational Same as debug RM CLI HiOS-2S RSPL Release 5.0 05/2015...
54.2 show Display device options and settings. 54.2.1 show logging snmp Show the SNMP logging settings. Mode: command is in all modes available Privilege Level: Guest Format: show logging snmp RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Administrator Format: sntp client broadcast-rcv-timeout <P-1> Parameter Value Meaning 128..2048 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
[description]: Description of the external time server Parameter Value Meaning 1..4 Enter a number in the given range. 1..65535 Port number of SNTP Server (default 123). string Enter a user-defined text, max. 32 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter a number in the given range. no sntp client server mode Disable the option Mode: Global Config Mode Privilege Level: Administrator Format: no sntp client server mode <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set the local socket port number used to listen for client requests. Mode: Global Config Mode Privilege Level: Administrator Format: sntp server port <P-1> Parameter Value Meaning 1..65535 Port number of SNTP Server (default 123). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
55.1.15sntp server broadcast interval Set the SNTP server's interval in seconds for sending\nbroadcast or multi- cast messages. Mode: Global Config Mode Privilege Level: Administrator Format: sntp server broadcast interval <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: Global Config Mode Privilege Level: Administrator Format: sntp server broadcast vlan <P-1> Parameter Value Meaning 0..4042 Enter the VLAN ID. Entering of ID 0 uses the management VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show sntp global 55.2.2 show sntp client status Show SNTP client status. Mode: command is in all modes available Privilege Level: Guest Format: show sntp client status RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show sntp server status 55.2.5 show sntp server broadcast Show SNTP server broadcast configuration parameters. Mode: command is in all modes available Privilege Level: Guest Format: show sntp server broadcast RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 584
Simple Network Time Protocol 55.2 show (SNTP) RM CLI HiOS-2S RSPL Release 5.0 05/2015...
56.1.4 spanning-tree bpdu-migration-check Force the specified port to transmit RST or MST BPDUs. Mode: Global Config Mode Privilege Level: Operator Format: spanning-tree bpdu-migration-check <P-1> Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
56.1.7 spanning-tree hello-time Set the Hello Time parameter [s]. Mode: Global Config Mode Privilege Level: Operator Format: spanning-tree hello-time <P-1> Parameter Value Meaning 1..2 Set the Hello Time parameter (unit: se- conds). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
56.1.9 spanning-tree max-age Set the bridge Max Age parameter. Mode: Global Config Mode Privilege Level: Operator Format: spanning-tree max-age <P-1> Parameter Value Meaning 6..40 Set the bridge Max Age parameter. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Operator Format: spanning-tree mst priority <P-1> <P-2> Parameter Value Meaning Enter the multiple spanning tree ID 0 (0 is for CIST and RSTP). 0..61440 Set the Mst Bridge priority. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Spanning Tree 56.2 spanning-tree 56.2.9 spanning-tree priority Specify the port priority. Mode: Interface Range Mode Privilege Level: Operator Format: spanning-tree priority <P-1> Parameter Value Meaning 0..240 Specify the port priority. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show spanning-tree mst <P-1> [port [<P-2>]] [port]: Display summarized information and settings for all ports in a MST instance. Parameter Value Meaning Enter the multiple spanning tree ID 0 (0 is for CIST and RSTP). slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
56.3.3 show spanning-tree port Spanning Tree information and settings for an interface. Mode: command is in all modes available Privilege Level: Guest Format: show spanning-tree port <P-1> Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 598
Spanning Tree 56.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set the SSH connection idle timeout in minutes (default: 5). Mode: Global Config Mode Privilege Level: Administrator Format: ssh timeout <P-1> Parameter Value Meaning 0..160 Idle timeout of a session in minutes (de- fault: 5). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set the maximum number of concurrent SSH sessions (default: 5). Mode: Global Config Mode Privilege Level: Administrator Format: ssh max-sessions <P-1> Parameter Value Meaning 1..5 Maximum number of concurrent SSH sessions. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
57.3 show 57.3 show Display device options and settings. 57.3.1 show ssh Show SSH server and client information. Mode: command is in all modes available Privilege Level: Guest Format: show ssh RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 606
Secure Shell (SSH) 57.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Traffic shape commands. 58.2.1 traffic-shape bw Set threshold value Mode: Interface Range Mode Privilege Level: Operator Format: traffic-shape bw <P-1> Parameter Value Meaning 0..100 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
58.4.2 show storm-control ingress Show storm control ingress parameters. Mode: command is in all modes available Privilege Level: Guest Format: show storm-control ingress [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Mode: command is in all modes available Privilege Level: Guest Format: show traffic-shape 58.4.4 show mtu Show mtu Parameters. Mode: command is in all modes available Privilege Level: Guest Format: show mtu RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 616
Storm Control 58.4 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
ASCII character string with 0..255 characters. Mode: Global Config Mode Privilege Level: Operator Format: system location <P-1> Parameter Value Meaning string Enter a user-defined text, max. 255 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Upper temperature threshold ([C], default 70). 59.2.2 temperature lower-limit Configure the lower temperature limit. Mode: Global Config Mode Privilege Level: Administrator Format: temperature lower-limit <P-1> Parameter Value Meaning -99..99 Lower temperature threshold ([C], default RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show eventlog 59.3.2 show system info Show system related information. Mode: command is in all modes available Privilege Level: Guest Format: show system info RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Privilege Level: Guest Format: show system flash-status 59.3.5 show system temperature limits Show temperature limits. Mode: command is in all modes available Privilege Level: Guest Format: show system temperature limits RM CLI HiOS-2S RSPL Release 5.0 05/2015...
59.3.8 show system temperature counters Display number of 20 centigrade C variations in maximum one hour period. Mode: command is in all modes available Privilege Level: Guest Format: show system temperature counters RM CLI HiOS-2S RSPL Release 5.0 05/2015...
59.3.9 show system resources Display the system resources information (cpu utilization, memory and net- work cpu utilization). Mode: command is in all modes available Privilege Level: Guest Format: show system resources RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 626
System 59.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set the idle timeout for a telnet connection in minutes. Mode: Global Config Mode Privilege Level: Administrator Format: telnet timeout <P-1> Parameter Value Meaning 0..160 Idle timeout of a session in minutes (de- fault: 5). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Set the maximum number of sessions for the telnet server. Mode: Global Config Mode Privilege Level: Administrator Format: telnet max-sessions <P-1> Parameter Value Meaning 1..5 Set the maximum number of connections for the telnet server. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display the current Telnet options. line Set the outbound Telnet operational mode as linemode (only takes effect for the serial connection). echo Enable local echo (only takes effect for the serial connection). RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Telnet 60.3 show 60.3 show Display device options and settings. 60.3.1 show telnet Show telnet server information. Mode: command is in all modes available Privilege Level: Guest Format: show telnet RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 632
Telnet 60.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
61.2 show 61.2 show Display device options and settings. 61.2.1 show snmp traps Display SNMP traps. Mode: command is in all modes available Privilege Level: Guest Format: show snmp traps RM CLI HiOS-2S RSPL Release 5.0 05/2015...
62.1.2 show custom-role commands Display the included and excluded commands. Mode: command is in all modes available Privilege Level: Guest Format: show custom-role commands [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
63.1 users Manage Users and User Accounts. 63.1.1 users add Add a new user. Mode: Global Config Mode Privilege Level: Administrator Format: users add <P-1> Parameter Value Meaning string <user> User name (up to 32 characters). 63.1.2 users delete Delete an existing user.
Mode: Global Config Mode Privilege Level: Administrator Format: users password-policy-check <P-1> <P-2> Parameter Value Meaning string <user> User name (up to 32 characters). enable Enable the option. disable Disable the option. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
63.2 show 63.2 show Display device options and settings. 63.2.1 show users Display users and user accounts information. Mode: command is in all modes available Privilege Level: Administrator Format: show users RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Assign a name to a VLAN Mode: VLAN Database Mode Privilege Level: Operator Format: name <P-1> <P-2> Parameter Value Meaning 1..4042 Enter the VLAN ID. string Enter a user-defined text, max. 32 charac- ters. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Delete a VLAN Mode: VLAN Database Mode Privilege Level: Operator Format: vlan delete <P-1> Parameter Value Meaning 2..4042 Enter VLAN ID. VLAN ID 1 can not be deleted or created RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Only frames received with a VLAN tag will be forwarded. All other frames will be dropped. 64.4.2 vlan ingressfilter Enable/Disable application of Ingress Filtering Rules. Mode: Interface Range Mode Privilege Level: Operator Format: vlan ingressfilter RM CLI HiOS-2S RSPL Release 5.0 05/2015...
64.4.4 vlan pvid Configure the VLAN id for a specific port. Mode: Interface Range Mode Privilege Level: Operator Format: vlan pvid <P-1> Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: no vlan tagging <P-1> 64.4.6 vlan participation include vlan participation to include Mode: Interface Range Mode Privilege Level: Operator Format: vlan participation include <P-1> Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Enter the VLAN ID. 64.4.8 vlan participation auto vlan participation to auto Mode: Interface Range Mode Privilege Level: Operator Format: vlan participation auto <P-1> Parameter Value Meaning 1..4042 Enter the VLAN ID. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Parameter Value Meaning 1..4042 Enter the VLAN ID. 64.5.2 show vlan brief Show general VLAN parameters. Mode: command is in all modes available Privilege Level: Guest Format: show vlan brief RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: show vlan member current 64.5.5 show vlan member static Show membership of ports in static VLAN. Mode: command is in all modes available Privilege Level: Guest Format: show vlan member static RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the management VLAN priority of the switch. Mode: Privileged Exec Mode Privilege Level: Operator Format: network management priority dot1p <P-1> Parameter Value Meaning 0..7 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Configure the management VLAN ip-dscp priority of the switch. Mode: Privileged Exec Mode Privilege Level: Operator Format: network management priority ip-dscp <P-1> Parameter Value Meaning 0..63 Enter a number in the given range. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
[dot1p]: Set and configure the vlan id and dot1p interface mode. Parameter Value Meaning 0..4042 Enter the VLAN ID. Entering of ID 0 disables the feature. priority 0 priority 1 priority 2 priority 3 priority 4 priority 5 priority 6 priority 7 default RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Format: no voice vlan auth 65.2.7 voice vlan data priority Trust/Untrust data traffic on the interface. Mode: Interface Range Mode Privilege Level: Operator Format: voice vlan data priority <P-1> RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 662
Voice VLAN 65.2 voice Parameter Value Meaning trust Trust data traffic on an interface. untrust Untrust data traffic on an interface. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Display a summary of the current Voice VLAN configuration for a specific port or for all ports. Mode: command is in all modes available Privilege Level: Guest Format: show voice vlan interface [<P-1>] Parameter Value Meaning slot no./port no. RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 664
Voice VLAN 65.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...
65.3 show F Weitere Unterstützung Technische Fragen Bei technischen Fragen wenden Sie sich bitte an den Hirschmann- Vertragspartner in Ihrer Nähe oder direkt an Hirschmann. Die Adressen unserer Vertragspartner finden Sie im Internet unter http://www.hirschmann.com Unser Support steht Ihnen zur Verfügung unter https://hirschmann-support.belden.eu.com...
Seite 666
Weitere Unterstützung 65.3 show Mit dem Hirschmann Competence Center entscheiden Sie sich in jedem Fall gegen jeglichen Kompromiss. Das kundenindividuelle Angebot lässt Ihnen die Wahl, welche Komponenten Sie in Anspruch nehmen. Internet: http://www.hicomcenter.com RM CLI HiOS-2S RSPL Release 5.0 05/2015...
Seite 667
Weitere Unterstützung 65.3 show RM CLI HiOS-2S RSPL Release 5.0 05/2015...