Simple Network Time Protocol (Sntp); Sntp; Sntp Client Operation; Sntp Client Operating-Mode - Hirschmann Rm Cli Hios-2S Rsps Referenzhandbuch

Simple Network Time Protocol

(SNTP)

53 Simple Network Time Protocol (SNTP)

53.1 sntp
Configure SNTP settings.
53.1.1

sntp client operation

Enable or disable the SNTP client

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client operation
no sntp client operation

Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no sntp client operation
53.1.2

sntp client operating-mode

Set the operating mode of the SNTP client. \nIn unicast-mode, the client
sends a request to the SNTP Server. \nIn broadcast-mode, the client waits
for a broadcast message from the SNTP Server.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client operating-mode <P-1>
Parameter Value
unicast
P-1
broadcast
53.1.3

sntp client request-interval

Set the SNTP client request interval in seconds. \nThe request-interval is
only used in the operating-mode unicast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client request-interval <P-1>
Parameter Value
5..3600
P-1
288
Meaning
Set the operating mode to unicast.
Set the operating mode to broadcast.
Meaning
Enter a number in the given range.
53.1 sntp
RM CLI HiOS-2S RSPS
Release 3.0 01/2014