Hirschmann HiOS-2A GRS1040 Referenzhandbuch Seite 1133

Open Shortest Path First (OSPF)
modify: Modify the parameters of a NSSA.
translator: Configure the NSSA translator related parameters.
role: Configure the NSSA translator role.
stability-interval: Configure the translator stability interval for the
NSSA, in seconds.
summary: Configure the import summary for the specified NSSA.
no-redistribute: Configure route redistribution for the specified NSSA.
default-info: Configure the nssa default information origination parame-
ters.
originate: Configuration whether a Type-7 LSA should be originated into
the NSSA.
[metric]: Configure the metric for the NSSA.
[metric-type]: Configure the metric type for default information.
Parameter Value
A.B.C.D
P-1
summary-link
P-2
nssa-external-link
A.B.C.D
P-3
a.b.c.d
P-4
summary-link
P-5
nssa-external-link
A.B.C.D
P-6
a.b.c.d
P-7
advertise
P-8
do-not-advertise
summary-link
P-9
nssa-external-link
A.B.C.D
P-10
a.b.c.d
P-11
0
P-12
0
P-13
no-area-summary
P-14
send-area-summary Enable the router to send area link state
0..16777215
P-15
0
P-16
488
Meaning
IP address.
Configure summary links LSDB type optional
mode.
Configure nssa external link LSDB type opti-
onal mode.
IP address.
IP subnet mask.
Configure summary links LSDB type optional
mode.
Configure nssa external link LSDB type opti-
onal mode.
IP address.
IP subnet mask.
Set as advertise.
Set as do-not-advertise.
Configure summary links LSDB type optional
mode.
Configure nssa external link LSDB type opti-
onal mode.
IP address.
IP subnet mask.
Configure the TOS (0 is for Normal Service).
Configure the TOS (0 is for Normal Service).
Disable the router from sending area link
state advertisement summaries.
advertisement summaries. The router floods
LSAs within the area using multicast. Every
topology change starts a new flood of LSAs.
Configure the default cost.
Configure the TOS (0 is for Normal Service).
39.1 ip
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016