Auto-Negotiate - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Interface

36.2 auto-negotiate

36.2.1 auto-negotiate
Enable or disable automatic negotiation on the interface. The cable crossing
settings have no effect if auto-negotiation is enabled. In this case cable cros-
sing is always set to auto. Cable crossing is set to the value chosen by the
user if auto-negotiation is disabled.

Mode: Interface Range Mode

Privilege Level: Operator

Format: auto-negotiate

no auto-negotiate
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no auto-negotiate
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
36.2 auto-negotiate
449