Garp Interface Leave-All-Time; Garp Gvrp Operation - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

GARP VLAN and Multicast Registra-
tion Protocol (GVRP and GMRP)

26.2.3 garp interface leave-all-time

Set the GARP leave-all time-interval. The leave all timer controls the fre-
quency with which the leaveall state machine generates leaveall PDUs. The
timer is required on a per-Port, per-GARP Participant basis.

Mode: Interface Range Mode

Privilege Level: Operator

Format: garp interface leave-all-time <P-1>
Parameter Value
P-1 200..6000

26.2.4 garp gvrp operation

Enable or disable GVRP on the port. When enabled, globally and on this port,
the device distributes VLAN membership information to GVRP aware
devices connected to this port.

Mode: Interface Range Mode

Privilege Level: Operator

Format: garp gvrp operation

no garp gvrp operation
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no garp gvrp operation
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
Meaning
Leave-All time-interval in centi-seconds.
26.2 garp
381