Logging Host Add - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Logging
Parameter Value
emergency
P-1
alert
critical
error
warning
notice
informational
debug
0
1
2
3
4
5
6
7

48.1.3 logging host add

Add a new logging host.

Mode: Global Config Mode

Privilege Level: Administrator

Format: logging host add <P-1> addr <P-2> <P-3> [trans-
port <P-4>] [port <P-5>] [severity <P-6>] [type <P-7>]
addr: Enter the IP address of the server.
[transport]: Configure the type of transport used for syslog server trans-
mission.
[port]: Enter the port used for syslog server transmission.
[severity]: Configure the minimum severity level to be sent to this syslog
server.
[type]: Configure the type of log messages to be sent to the syslog server.
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
Meaning
System is unusable. System failure has
occurred.
Action must be taken immediately. Unrecover-
able failure of a component. System failure
likely.
Recoverable failure of a component that may
lead to system failure.
Error conditions. Recoverable failure of a
component.
Minor failure, e.g. misconfiguration of a
component.
Normal but significant conditions.
Informational messages.
Debug-level messages.
Same as emergency
Same as alert
Same as critical
Same as error
Same as warning
Same as notice
Same as informational
Same as debug
48.1 logging
573