Signal Contact
73.1.10signal-contact trap
Configure if a trap is sent when the Signal Contact\nchanges state (in monitor
mode).
Mode: Global Config Mode
Privilege Level: Administrator
Format: signal-contact <P-1> trap
Parameter Value
signal contact no.
P-1
no signal-contact trap
Disable the option
Mode: Global Config Mode
Privilege Level: Administrator
Format: no signal-contact <P-1> trap
73.1.11signal-contact module
Configure the monitoring of the specific module.
Mode: Global Config Mode
Privilege Level: Administrator
Format: signal-contact <P-1> module <P-2>
Parameter Value
signal contact no.
P-1
slot no./port no.
P-2
no signal-contact module
Disable the option
Mode: Global Config Mode
Privilege Level: Administrator
Format: no signal-contact <P-1> module <P-2>
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
Meaning
Meaning
73.1 signal-contact
797