Logging Snmp-Request Set Operation - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

SNMP Logging
Parameter Value
emergency
P-1
alert
critical
error
warning
notice
informational
debug
0
1
2
3
4
5
6
7

78.1.3 logging snmp-request set operation

Enable or disable logging of SNMP GET or SET requests.

Mode: Global Config Mode

Privilege Level: Administrator

Format: logging snmp-request set operation <P-1>
Parameter Value
enable
P-1
disable
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
Meaning
System is unusable. System failure has
occurred.
Action must be taken immediately. Unrecover-
able failure of a component. System failure
likely.
Recoverable failure of a component that may
lead to system failure.
Error conditions. Recoverable failure of a
component.
Minor failure, e.g. misconfiguration of a
component.
Normal but significant conditions.
Informational messages.
Debug-level messages.
Same as emergency
Same as alert
Same as critical
Same as error
Same as warning
Same as notice
Same as informational
Same as debug
Meaning
Enable logging of SNMP GET or SET requests.
Disable logging of SNMP GET or SET requests.
78.1 logging
823