Ip Ospf Area - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Open Shortest Path First (OSPF)
39.1 ip
Set IP parameters.

39.1.1 ip ospf area

Configure the OSPF router area. A router area is a sub-division of an OSPF
autonomous system and you identify an area by an area-id. OSPF networks,
routers, and links that have the same area-id form a logical set.

Mode: Global Config Mode

Privilege Level: Operator

Format: ip ospf area <P-1> range add <P-2> <P-3> <P-4>
modify <P-5> <P-6> <P-7> <P-8> delete <P-9> <P-10> <P-
11> add delete stub add <P-12> modify <P-13> summarylsa
<P-14> default-cost <P-15> delete <P-16> virtual-link
add <P-17> delete <P-18> modify <P-19> authentication
type <P-20> key <P-21> key-id <P-22> hello-interval <P-
23> dead-interval <P-24> transmit-delay <P-25>
retransmit-interval <P-26> nssa add <P-27> delete <P-
28> modify translator role <P-29> stability-interval
<P-30> summary no-redistribute default-info originate
[metric <P-31>] [metric-type <P-32>]
range: Configure the range for the area. You summarize the networks within
this range into a single routing domain.
add: Create a router area.
modify: Modify the parameters of a router area.
delete: Delete a specific router area.
add: Create a new area.
delete: Delete a existing area.
stub: Configure the preferences for a stub area. You shield stub areas from
external route advertisements, but the area receives advertisements from
networks that belong to other areas of the same autonomous system.
add: Create a stub area. The command also allows you to convert an existing
area to a stub area.
486
39.1 ip
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016