Ring-Coupling Delete; Ring-Coupling Modify - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Ring Coupling

43.1.2 ring-coupling delete

Delete the Ring/Network coupling configuration with the coupling-port index.

Mode: Global Config Mode

Privilege Level: Operator

Format: ring-coupling delete <P-1>
Parameter Value
slot no./port no.
P-1

43.1.3 ring-coupling modify

Modify the Ring/Network coupling configuration with the coupling-port index.

Mode: Global Config Mode

Privilege Level: Operator

Format: ring-coupling modify <P-1> mode <P-2> control-
port <P-3> partner-port <P-4> net-coupling <P-5>
redundancy-mode <P-6>
mode: Modify the operating mode.
control-port: Modify the control port (<slot/port>). The control port is only
used for outband configurations.
partner-port: Modify the partner coupling port(<slot/port>). The partner
coupling port is only used for single configuration.
net-coupling: Configure the Ring/Network coupling mode as either net-
work or ring-only.
redundancy-mode: Configure the redundancy mode as either extended or
normal.
Parameter Value
slot no./port no.
P-1
532
Meaning
Meaning
43.1 ring-coupling
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016