Igmp-Snooping; Igmp-Snooping Vlan-Id - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

IGMP Snooping

35.2 igmp-snooping

Configure IGMP snooping.

35.2.1 igmp-snooping vlan-id

Configure the VLAN parameters.

Mode: VLAN Database Mode

Privilege Level: Operator

Format: igmp-snooping vlan-id <P-1> mode fast-leave
groupmembership-interval <P-2> maxresponse <P-3> mcr-
trexpiretime <P-4> querier mode address <P-5> forward-
known <P-6> forward-all <P-7> static-query-port <P-8>
automatic-mode <P-9>
mode: Enable or disable IGMP snooping per VLAN.
fast-leave: Enable or disable IGMP snooping fast-leave per VLAN.
groupmembership-interval: Set IGMP group membership interval time
(2-3600) in seconds per VLAN.
maxresponse: Set the igmp maximum response time (1-25) in seconds per
VLAN.
mcrtrexpiretime: Sets the multicast router present expiration time (0-
3600) in seconds per VLAN.
querier: Set IGMP snooping querier on the system.
mode: Enable or disable IGMP snooping querier per VLAN.
address: Set IGMP snooping querier address on the system using a VLAN.
forward-known: Sets the mode how known multicast packets will be trea-
ted.The default value is registered-ports-only(2).
forward-all: Enable or disable IGMP snooping forward-all.
static-query-port: Enable or disable IGMP snooping static-query-port.
automatic-mode: Enable or disable IGMP snooping automatic-mode.
Parameter Value
1..4042
P-1
2..3600
P-2
1..25
P-3
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016
Meaning
Enter the VLAN ID.
Enter a number in the given range.
Enter a number in the given range.
35.2 igmp-snooping
435