Ip Ospf Link-Type - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Open Shortest Path First (OSPF)
Parameter Value
A.B.C.D
P-1

39.2.3 ip ospf link-type

Configure the OSPF link type.

Mode: Interface Range Mode

Privilege Level: Operator

Format: ip ospf link-type <P-1>
Parameter Value
broadcast
P-1
nbma
point-to-point
point-to-multipoint
500
Meaning
IP address.
Meaning
Configure the link-type as broadcast for the
interface. In broadcast networks, routers
discover their neighbors dynamically using
the OSPF hello protocol.
Configure the link-type as Non-Broadcast
Multi-Access for the interface. The nbma
mode, emulates OSPF operation over a broad-
cast network. The nbma mode is the most effi-
cient way to run OSPF over non-broadcast
networks, both in terms of the LSDB size and
the amount of routing protocol traffic.
However, this mode requires direct communi-
cation between every router in the nbma net-
work.
Configure the link-type as point-to-point
for the interface. Use the point-to-point
link-type in a network that joins a single
pair of routers.
Configure the link-type as point-to-multi-
point for the interface. In the point-to-
multipoint mode, OSPF treats each router-to-
router link over non-broadcast networks as
if they were point-to-point links.
39.2 ip
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016