Selftest Boot-Default-On-Error - Hirschmann HiOS-2A GRS1040 Referenzhandbuch

Selftest

70.1.4 selftest boot-default-on-error

Enable or disable loading of the default configuration in case there is any
error loading the configuration during boot phase. If disabled the system will
be halted.

Mode: Global Config Mode

Privilege Level: Administrator

Format: selftest boot-default-on-error

no selftest boot-default-on-error
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no selftest boot-default-on-error
778
70.1 selftest
RM CLI HiOS-2A GRS1040
Release 6.1 09/2016