Sntp Client Request-Interval; Sntp Client Broadcast-Rcv-Timeout - Hirschmann Hios-2S Rspl Referenzhandbuch

Simple Network Time Protocol
(SNTP)
Parameter Value
unicast
P-1
broadcast

55.1.3 sntp client request-interval

Set the SNTP client request interval in seconds. \nThe request-interval is
only used in the operating-mode unicast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client request-interval <P-1>
Parameter Value
5..3600
P-1

55.1.4 sntp client broadcast-rcv-timeout

Set the SNTP client broadcast receive timeout in seconds. \nThe broadcast
receive timeout is only used in the operating-mode broadcast.

Mode: Global Config Mode

Privilege Level: Administrator

Format: sntp client broadcast-rcv-timeout <P-1>
Parameter Value
128..2048
P-1
RM CLI HiOS-2S RSPL
Release 5.0 05/2015
Meaning
Set the operating mode to unicast.
Set the operating mode to broadcast.
Meaning
Enter a number in the given range.
Meaning
Enter a number in the given range.
55.1 sntp
575