Sntp Client Operation; Sntp Client Operating-Mode - Hirschmann Hios-2S Rspe Referenzhandbuch
Rail switch power enhanced
Simple Network Time Protocol
(SNTP)
69.1 sntp
Configure SNTP settings.
69.1.1 sntp client operation
Enable or disable the SNTP client
Mode: Global Config Mode
Privilege Level: Administrator
Format: sntp client operation
no sntp client operation
Disable the option
Mode: Global Config Mode
Privilege Level: Administrator
Format: no sntp client operation
69.1.2 sntp client operating-mode
Set the operating mode of the SNTP client. \nIn unicast-mode, the client
sends a request to the SNTP Server. \nIn broadcast-mode, the client waits
for a broadcast message from the SNTP Server.
Mode: Global Config Mode
Privilege Level: Administrator
Format: sntp client operating-mode <P-1>
692
69.1 sntp
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Kapitel
