Silvercrest SKGE 2000 C3 Bedienungsanleitung Seite 19

NOTE
To refit the hotplates 0, place the hotplates 0 onto the base such that both
notches next to the fat outlet 9 grip the hooks on the base. Then press down the
front part of the hotplate 0 until you hear it engage.
Proceed in the same way with the second hotplate 0.
■ To clean the outer surfaces of the appliance, wipe it down with a damp cloth
and a small amount of washing-up liquid. Wipe off any detergent residues
using a cloth moistened with clean water.
Ensure that all parts are completely dry before re-using the appliance.
Wipe the cleaning scraper w with a damp cloth. For more stubborn soiling,
■
add some mild detergent to the cloth or rinse it in warm water and detergent.
NOTE
Clean the emptied fat collector tray 7 in hot water and washing-up liquid.
■
Rinse off detergent residues with clean water and dry it well.
NOTE
Storage
Store the cleaned appliance in a dry place.
Lock the appliance by sliding the safety catch 2 to the position
■ 16 │
GB│IE
For gentle cleaning of the hotplates 0, we recommend that you
wash them by hand, as described above. You can, however, also
clean the hotplates 0 in the dishwasher.
For gentle cleaning of the cleaning scraper w we recommend that
you wash it by hand as described above. You can, however, also
clean the cleaning scraper w in the dishwasher.
For gentle cleaning of the fat collector tray 7 we recommend that
you wash it by hand as described above. You can, however, also
clean the fat collector tray 7 in the dishwasher.
.
SKGE 2000 C3