Test Certificate - Siemens SIMOVERT MASTERDRIVES Motion Control Betriebsanleitung

Certificates

Test certificate

Equipment
• Type
• Order No.
The 100% inspection was performed
according to test instructions
Test scope:
The equipment complied with the test requirements.
The test results are documented within the test data base
1) For complete type, serial number and technical data please see rating plate.
A&D DS A PE D P
Schlögel
14-2
I. Insulation test
II. Function test
acc. to EN 50178
III. RUN-IN
IV. Function test
acc. to EN 50178
Automation and Drives
Erlangen, 24.08.1998
AC drive converter
SIMOVERT
MASTERDRIVES
6SE70...
1)
475 100.9000.00 QP
476 100.9000.00 QP
476 200.9000.00 QP
• Refer to EN 50178, Part 9.4.5.2
and UL508/CSA 22.2-14.M 91,
Part 6.8
• Initialization and start-up
•
Customer terminals
•
Power section inspection
•
Inspection of protection and
monitoring devices
•
Continuous test > 5 hours
ambient temperature 55 °C
• see II. Function test
6SE7087-6JD50
Operating Instructions SIMOVERT MASTERDRIVES
10.98
size A - D
size E - G
size J
Siemens AG