Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting-up
7.1
Power connections
WARNING
Protective
conductor
Order
number
Cross-section
6SE70...
VDE
AWG gR (SITOR)
[mm²]
16-1EA51
1.5
16
18-0EA51
1.5
16
21-0EA51
2.5
14
21-3EB51
2.5
14
21-8EB51
4
10
22-6EC51
10
6
23-4EC51
16
4
23-8ED51
16
4
24-7ED51
25
2
26-0ED51
25
2
27-2ED51
50
00
7-4
If the input and output terminals are mixed up, the unit will be
destroyed!
If the DC link terminals are mixed up or short-circuited, the converter
will be destroyed!
The unit must not be operated via an earth leakage circuit-breaker (DIN
VDE 0160).
The protective conductor must be connected up both on the mains side
and on the motor side.
On account of leakage currents through the interference-suppression
capacitors, a minimum cross-section of 10 mm² must be used in
accordance with VDE 0160. If mains connections with cross-sections
less than 10 mm² are used, the following measures can be applied.
If the unit is mounted on a grounded mounting surface via a conductive
connection, the protective conductor cross-section can be the same as
that of the supply-cable conductor.
In the case of insulated installation or a poor conductive connection to
the mounting surface, a separate protective conductor with a cross-
section of 10 mm² can be connected up instead of the protective
conductor of the mains connection.
Mains connection
Recommended fuses
gL (NH)
[A]
3NE
[A]
3NA
16
---
10 3803 AJT, LPJ
16 1813-0 16 3805 AJT, LPJ
16 1813-0 16 3805 AJT, LPJ
20 1814-0 25 3810 AJT, LPJ
25 1815-0 25 3810 AJT, LPJ
35 1803-0 35 3814 AJT, LPJ
40 1802-0 50 3820 AJT, LPJ
50 1817-0 63 3822 AJT, LPJ
63 1818-0 63 3822 AJT, LPJ
80 1820-0
3830 AJT, LPJ
100
80 1820-0
3830 AJT, LPJ
100
AWG: American Wire Gauge
Table 7-1
Conductor cross-sections, fuses, reactors
North America
reactor
Type
[V]
[A]
4EP...
600
8
3200-1US
600
12
3400-2US
600
15
3400-1US
600 17,5 3500-0US
600
25
3600-4US
600
35
3600-5US
600
45
3700-2US
600
50
3700-5US
600
60
3800-2US
600
80
3800-7US
600
90
3900-2US
6SE7087-6JD50
Operating Instructions
SIMOVERT MASTERDRIVES
10.99
Motor
connection
Line
Cross-section
VDE
AWG
[mm²]
1.5
16
1.5
16
1.5
16
2.5
14
2.5
14
10
6
10
6
16
4
16
4
16
4
25
2
Siemens AG
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
