Certificates - Siemens SIMOVERT MASTERDRIVES Motion Control Betriebsanleitung

10.98
14

Certificates

Confirmation
This confirms that
Equipment
• Type
• Order No.
is manufactured in conformance with DIN VDE 0558, Part 2 and EN 60204, Part 6.2
(= DIN VDE 0113, Part 6.2).
This equipment fulfills the protection requirements against electric shock according
to DIN VDE 0106 Part 100 when the following safety rules are observed:
• Service work in operation is only permissible at the electronics box
• The converter must be switched into a no-voltage condition and isolated from
the supply when replacing any part/component
• All panels must be closed during operation.
Thus, this equipment conforms to the appropriate regulations in Germany according
to VBG 4 §2 (2) (VBG is a German regulatory body for safety-related issues).
The local operating regulations (e.g. EN 50110-1, EN 50110-2) must be observed
when operating the equipment.
A&D DS A P1
Mickal
Siemens AG 6SE7087-6JD50
SIMOVERT MASTERDRIVES
AC drive converter
SIMOVERT
MASTERDRIVES
6SE70...
Operating Instructions
Automation and Drives
Erlangen, 01.05.1998
Certificates
14-1