Zipro Rook Bedienungsanleitung Seite 15

EN
STEP 4.
Remove the rear and front handlebar post covers (32L/R) and the handlebar
adjustment knob (29).
Run the heart rate measurement cable (36) through the handlebar post (25).
Install the handlebar adjustment knob (29) on the rear handlebar cover (32L)
with a flat washer (31).
Set the handlebar to the desired height (35) on the post (25) and lock it with
the handlebar adjustment knob (29)
STEP 5.
Connect the heart rate measurement cable (36) and the computer cable (24) to
the computer (30).
Fix the computer (30) to the handlebar post (25) using the computer bolt (26).
Make sure every bolt is tight.
Fix the rear and front covers (32L/R) to the handlebar post (25) with cross-head
screws.
STEP 6.
Install the cover (22) onto the handlebar post (25). Connect the computer
cable (24) to the connecting cable (23).
Fix the handlebar post (25) to the main frame (1) with hexagonal bolts (21),
curved washers (39), and flat washers (40).
Slide the handlebar post cover on (22).
STEP 7.
Install the water bottle holder (44) on the handlebar post (25) using the bolt
(45) and the flat washer (42). Make sure the holder is secure and insert the
bottle.
STEP 8.
Plug in the power supply unit (41) and plug the cable into the power socket on
the front of the mainframe.
15