HBM espressoDAQ DQ401 Bedienungsanleitung Seite 53

Starting measurement
The "Measurement channels" mask (1) is displayed.
1
7
1 Measurement channels mask
Live measured values
2
Zero setting
3
4
Measurement channel activation
 Assign the connected sensors to channels.
 Allocate unique channel names.
 Mark the channels to be set to zero and run a zero adjustment.
 Start the measurement.
 The live measured values of the measurement channels are displayed as
mV/V if no TEDS sensors are connected.
 The live measured values of the measurement channels are displayed in
the correct unit of measurement if TEDS sensors are connected.
A2888−1.1 en/de
3
6
2
4
Sensor database
5
Setup
6
Start
7
53
5