HBM espressoDAQ DQ401 Bedienungsanleitung Seite 11

11
Product description
Connection technique
Transducers are connected to the amplifiers by RJ45 connectors. These con-
nectors can also be assembled without tools, using an insulation displace-
ment connection.
TEDS
The DQ401 and DQ430 espressoDAQ amplifiers support TEDS (Transducer
Electronic Data Sheet). When transducers are connected, they are automati-
cally detected. With TEDS on the transducer side and USB on the system
side, there is nothing getting in the way of "plug and measure".
Software
An easy to operate software that is specifically tailored to espressoDAQ and
is suitable for all the modules, is available for configuration, data acquisition
and visualization.
This gets you quickly to your measurement result, and you can visualize the
measured data, subsequently view them and export them in the most com-
monly used formats.
A2888−1.1 en/de