Active Usb Hub Connection (X4) - HBM espressoDAQ DQ401 Bedienungsanleitung

25
Starting up

5.4 Active USB HUB connection (x4)

A maximum of four espressoDAQ modules can be connected to the active
USB hub recommended by HBM. This allows a small, and fully-synchronized
system to be set up.
NOTE
The USB HUB must comply with the current USB 2.0 High-Speed standard
(see Universal Serial Bus Revision 2.0 specification), and be listed
(www.usb.org). The associated power supply must provide the relevant power,
so that all the existing channels have an adequate power supply (5V/500 mA
each).
DQ module
DQ module
DQ module
DQ module
Fig. 5.4: Active USB HUB
A2888−1.1 en/de