HBM espressoDAQ DQ401 Bedienungsanleitung Seite 56

56
Starting measurement
Automatic visualization:
The combination of "Automatic" and pressing the "Use default setting" but-
ton generates a Scope Panel that is divided into four.
1
1 Stop
Each panel represents one espressoDAQ channel in single module operation:
 Measured values are acquired and displayed in channels 2 and 4.
Press the "Stop" button (1) to stop measurement, and the measurement data
can be stored in different formats for later analysis.
This concludes the measurement.
A2888−1.1 en/de