3.5.3 Connecting the optional foot switch
Potential-free contact for thread cutting on DH32GS.
The foot switch is used to reverse the direction of rotation for thread cutting.
Connector plug
Foot switch
Connect the foot switch to the connector. Compare the PIN assignment of the connector in
the cabinet.
INFORMATION
The connection cable has no polarity. The contact (2 wires) is designed as looped signal.
Version 1.2.9 - 2021-09-28
Img.3-6: Connector plug foot switch
Translation of original instruction
DH26GT | DH28GS | DH32GS
EN
95