Inhaltsverzeichnis
Werbung
Interval
Where?
As required
As required
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
Maintenance
Version 1.2.9 - 2021-09-28
What?
How?
Obligations of the operating company on page 77
If the light bulb is defective:
Disconnect the plug from the power supply.
Unscrew the glass cover of the machine illumination.
Unscrew the light bulb by turning it to the left and by slightly
pressing the bulb into the socket (bayonet).
Replace the light bulb.
Screw the glass cover onto the machine illumination.
Img.6-7:
Machine illumination on DH 28 GS
ATTENTION!
Parts may fly off at high speed. When disassembling
the key housing, please make sure that the machine
is only maintained and prepared by qualified staff.
Translation of original instruction
Electrical system on page 84
DH26GT | DH28GS | DH32GS
Machine illumination
EN
123
Werbung
Inhaltsverzeichnis
