Inhaltsverzeichnis
Werbung
Obligations of the operator
have obtained a training regarding the handling of the geared drill,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order:
disconnect all poles
secure against restarting
check that there is no voltage
1.7
Operator positions
The operator's position is in front of the geared
drill.
1.8
Safety measures during operation
CAUTION!
Risk due to inhaling dusts and mist hazardous to health.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using
inflammable auxiliary materials (e.g. spirit) it is necessary to take additional preventive
measures in order to safely avoid health risks.
EN
DH26GT | DH28GS | DH32GS
78
Translation of original instruction
Img.1-1:
Operator positions
Version 1.2.9 - 2021-09-28
Additional
requirements
regarding the
qualification
Safety
Werbung
Inhaltsverzeichnis
