Inhaltsverzeichnis
Werbung
Coolant
dosing tap
Adjust the flow using the shut-off and dosing tap.
ATTENTION!
Destruction of the pump due dry running.
The pump is lubricated by the cooling agent. Do not operate the pump without coolant.
Clean the collection container of the chip filter in regular intervals.
WARNING!
Spurting and overrun of coolants and lubricants. Ensure that cooling lubricants are not
discharged onto the floor. Any cooling lubricants that run onto the floor must be
removed immediately.
Regularly clean the coolant tank.
CAUTION!
The cooling lubricant needs to be checked at least weekly, including during downtimes,
with regard to its concentration, ph-value, bacteria and fungal decay.
Cooling lubricants and tanks on page 125
Inspection plan for water-mixed cooling lubricants on page 126
Please note the VKIS - VSI - IGM substance list for coolant lubricants as per DIN 51385
for metal working.
EN
DH32GS
114
Img.4-21: Coolant shut-off tap and doser
Translation of original instruction
Version 1.2.9 - 2021-09-28
Werbung
Inhaltsverzeichnis
