Emergency Stop Button; Lockable Main Switch - Optimum Opti mill MB 4P Betriebsanleitung

WARNING!
The separating protective equipment which is made available and delivered together with the
machine is designed to reduce the risk of workpieces or fractions of them which being expelled,
but not to remove them completely. Always work carefully and observe the limit values of your
chipping process.
1.9.1

Emergency stop button

CAUTION!
Only press the emergency stop button in a genuine emergency. Do not use the
emergency stop button to stop the machine during normal operation.
CAUTION!
The spindle continues to rotate for a
while, depending on the moment of
inertia of the spindle and the tool in
use.
The emergency stop button brings the
machine to a standstill.
Turn the knob to the right to unlock and
release the emergency stop button.
1.9.2

Lockable main switch

In the "0" position, the lockable main switch can be secured against accidental or non-
authorised switching on by means of a padlock.
The power supply is interrupted by switchingoff the main plug.
Except for the areas marked by the pictogram in the margin.
WARNING!
Dangerous voltage even if the main switch is switched off. The areas marked by the
pictogram might contain live parts, even if the main switch is switched off.
Version 1.1.8 - 2021-7-29
Emergency-stop
button
Img.1-1:
Translation of original instructions
Emergency stop button
MB4P ǀ MB4PV EN
73