4.14.1 Gear selector switch - DH32GS
The speed is selected by means of the gear selector switches.
Speed table
Gear selector switch
Drive motor step switch
4.14.2 Speed table DH 32 GS
Img.4-14: DH32GS ~50Hz
4.15
Spindle quill feed
The spindle sleeve feed is performed manually by actuating the spindle sleeve lever or auto-
matically.
4.15.1 Manual spindle sleeve feed
Move the sleeve downward by means of the spindle sleeve lever. The sleeve is returned to its
initial position by means of the spring force.
4.15.2 Automatic spindle sleeve feed
The feed is activated by pressing the push buttons in the spindle sleeve lever. The feed is per-
formed by an electromagnetic coupling. The feed is switched off by the drilling depth stop or by
pressing the push button in the spindle sleeve lever again.
EN
DH32GS
110
Selector rotary
switch
Push button in
Spindle sleeve
lever
Translation of original instruction
Version 1.2.9 - 2021-09-28