User Positions; Safety Devices; Emergency Stop Push Button; Main Switch - Optimum Optidrill DX 13V Betriebsanleitung

1.7

User positions

The operator position is in front of the drilling machine.
1.8

Safety devices

Use the drilling machine only with properly functioning safety devices. Stop the drilling machine
immediately, if a safety device fails or is faulty or becomes ineffective. It is your responsibility!
If a safety device has been activated or has failed, the drilling machine must only be used if you

the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.
1.9

EMERGENCY STOP push button

CAUTION!
The drilling spindle keeps turning for a short time even after actuating the EMERGENCY-
STOP push button depending on the preset speed.
1.10

Main switch

WARNING!
Dangerous voltage even if the main switch is switched off.
The areas marked by the pictogram might contain live parts, even if the main switch is
switched off.
In the "0" position, the main switch can be secured against accidental or non-authorised switch-
ing on. The power supply is interrupted by switching off the main plug.
1.11

Drilling table

Seats for T-slots are attached to the clamping table.
WARNING!
Risk of injury due to workpieces flying off at high speed. Securely fix the workpiece on
the drilling table.
Safety
Version 1.0.4 - 2021-08-30 Originalbetriebsanleitung
DX13V | DX15V EN
41