Inhaltsverzeichnis
Werbung
1.9
Safety devices
Use the geared drill only with properly functioning safety devices.
Stop the geared drill immediately if there is a failure on the safety device or if it is not function-
ing for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the geared drill must only be used if you
the cause of the fault has been eliminated,
you have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the geared drill. The possible consequences are:
injuries may occur due to workpiece or parts of workpieces flying off,
contact with rotating parts,
fatal electrocution,
The geared drill includes the following safety devices:
an EMERGENCY STOP push button,
a drilling table with T-slots to fix the workpiece or a vice,
a drill chuck guard, in order to prevent interference with the rotating tool.
INFORMATION
The geared drill can only be switched on if the drill chuck protection is closed.
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
1.10
Safety check
Check the geared drill before each start-up or at least once per shift. Inform the person respon-
sible immediately of any damage, defects or changes in the operating function.
Check all safety devices
at the beginning of each shift (with the machine stopped),
once a week (with the machine in operation),
after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the geared drill
are legible (clean them, if necessary),
are complete (replace if necessary).
INFORMATION
Organise the checks according to the following table;
General check
Equipment
Protective covers
Date:
Safety
Version 1.2.9 - 2021-09-28
Check
Mounted, firmly bolted and not damaged
checked by (signature):
Translation of original instruction
OK
DH26GT | DH28GS | DH32GS
EN
79
Werbung
Inhaltsverzeichnis
