Inhaltsverzeichnis
Werbung
4.12.1 Drill depth stop - DH32GS
Use the drilling depth stop when drilling several holes of the same depth.
Adjust the desired drilling depth by means of the scale and of the adjusting screw
Scale
Adjusting screw
Drill depth stop
4.13
Switching the machine on - DH32GS
INFORMATION
The machine cannot be started, if the drill chuck guard is not closed.
Switch on the master switch.
Close drill chuck protection.
Select the gear stage
Select the direction of rotation.
Actuate the push button "ON".
4.14
Switching the machine off - DH32GS
CAUTION!
Only press the emergency stop button in a genuine emergency. You should not use the
emergency stop button to stop the machine during normal operation.
Actuate the push button "OFF".
For a long-term standstill of the machine switch it off at the master switch.
Version 1.2.9 - 2021-09-28
Img.4-13: Drill depth stop
Translation of original instruction
DH32GS
EN
109
Werbung
Inhaltsverzeichnis
