Distance Spindle - Table; Dimensions Machine Foot; 2.12.1 Working Surface Machine Foot; Weight Of Machine [Kg] - Optimum OPTIdrill DH 28BV Betriebsanleitung

DH 24 BV
2.11

Distance spindle - table

max. 515mm
2.12

Dimensions machine foot

447 x 300mm

2.12.1 Working surface machine foot

280 x 260mm
2.13

Weight of machine [kg]

115kg
2.14

Spindle speeds (Motor + Gear) ~ 50 Hz

300 - 4,000 min
2.15

Spindle speeds (Motor + Gear) ~ 60 Hz

330 - 4,800 min
Speed steps
2
2.16

Environmental conditions temperature

Relative humidity 25 - 80%
Emissions
The generation of noise emitted by the drilling-milling machine is 76 to 80 dB(A). The sound
power level is 88 to 92 dB(A). If the drilling machine is installed in an area where various
machines are in operation, the noise exposure (immission) on the operator of the drilling
machine at the working place may exceed 80 dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine. Furthermore, the noise emission also depends on production engi-
neering factors, e.g. speed, material and clamping conditions.
INFORMATION
The specified numerical value represents the emission level and does not necessarily a safe
working level.
Though there is a dependency between the degree of the noise emission and the degree of the
noise disturbance it is not possible to use it reliably to determine if further precaution measures
are required or not.
The following factors influence the actual degree of the noise exposure of the operator:
Characteristics of the working area, e.g. size or damping behaviour,

other noise sources, e.g. the number of machines,

other processes taking place in proximity and the period of time, during which the operator

is exposed to the noise.
Technical data
Version 1.1.4 - 2022-09-14
DH 28 BV
max. 860mm
527 x 350mm
320 x 320mm
152kg
-1
300 - 4,000 min
-1
330 - 4,800 min
2
5 - 35 °C
Originalbetriebsanleitung
DH 34 BV
max. 790mm
637 x 400
390 x 400mm
270kg
-1 -1
300 - 4,000 min
-1 -1
330 - 4,800 min
2
DH24BV | DH28BV | DH34BV | DH40BV
DH 40 BV
275kg
-1
150 - 2,000 min
-1
180 - 2,400 min
2
GB
79