Operating control lamp
The operating control lamp on the operating panel has to flash.
Machine illumination ON/OFF
Switches the illumination on or off.
Main switch
Interrupts or connects the power sup-
ply.
5.2.2
Drill depth stop
When
drilling
several
holes of the same depth
you can use the drill depth
stop.
Loosen the locking
screw and turn the
graduated collar until
the required drilling
depth matches with
the indicator.
Re-tighten the locking
screw.
5.2.3
Control panel B34 H Vario
RPM indication
EMERGENCY STOP impact
Selection switch for operating
Turning direction
Thread cutting / Automatic
Machine lamp ON/OFF
Coolant pump ON / OFF
Operation
Version 1.1.3 - 2020-07-21
Abb.5-2:
Scale
Locking screw
Drill depth stop
Abb.5-3:
switch
mode
Abb.5-4: Operating element on the control panel B24HV
Translation of the original instructions
Main switch
Machine illumination
Machine illumination B34H
Drill depth stop
Push button "ON"
Push button "OFF"
Potentiometer
B34H | B34HV
GB
97