Control Panel Dh26Gt And Dh28Gs; Direction Of Rotation Selector Switch - Optimum OPTidrill DH 26GT Betriebsanleitung

4.6

Control panel DH26GT and DH28GS

Emergency-stop switch
Selector switch rotational direc-
Left hand motion/ clockwise
rotation
Machine illumination
On / Off
Push button "OFF"

Direction of rotation selector switch

The direction of rotation of the gear unit drilling machine can be set using the direction of rota-
tion switch.
With the switch two speed levels can be selected for each direction of rotation.
The marking "R" means clockwise rotation.

The marking "L" means anticlockwise rotation.

Push button ON
The push button "ON" switches on the rotation of the drilling spindle.
Push button OFF
The "push button OFF" switches the rotation of the drilling spindle off.
Operation control light
The control lamp for operation on operating panel must flash up.
Machine illumination ON / OFF
Switches the backlight on or off.
Master switch
Interrupts or connects the power supply.
Version 1.2.9 - 2021-09-28
tion
Img.4-2: Operating elements on the control panel
Translation of original instruction
Drill depth scale
DH26GT | DH28GS EN
99